Lighting / Fixtures
Installation Guide for Golden Lighting 0305-BA2 Carver 2-Light Wall Fixture
A comprehensive installation guide for the Golden Lighting 0305-BA2 Carver 2-Light wall fixture, including wiring diagrams, mounting instructions, and safety precautions.
Table of contents
Quick guide from the manual
This document provides assembly and installation instructions for the Golden Lighting 0305-BA2 wall fixture. Installation must be performed by an accredited professional. Always shut off the power supply at the circuit breaker before beginning work. Ensure you use only the specified bulb types and do not exceed the maximum wattage rating.
Preparing for installation
Carefully unpack the fixture and the hardware bag. Remove the old fixture and mounting strap from the wall. Ensure the new mounting strap (B) is aligned with the junction box and the fixture's backplate. Secure the mounting strap to the junction box using the provided screws (D).
Connecting the wires
Have an assistant support the fixture's weight during wiring. Connect the fixture wires to the house supply wires using wire connectors, ensuring all twists are in the same direction:
- Hot: Smooth, black, or transparent wire with black inner thread.
- Neutral: Ribbed, white, or transparent wire with white inner thread.
- Ground: Copper, bare metal, green, or transparent wire with green inner thread.
If no house ground wire is present, wrap the fixture's ground wire around the ground screw (E) on the mounting bracket.
Finishing the installation
Place the backplate (F) against the mounting strap (B) and secure it with decorative nuts (G). Attach the shades (I) over the sockets (H) and secure them using the socket rings (J). Use the provided tool (K) to tighten the rings. Finally, install the light bulbs (not included) according to the fixture's specifications.
Manufacturer information
Golden Lighting
Practical help
Common problems
No house ground wire available in the junction box.
Locate the ground screw (E) on the mounting bracket and wrap the fixture's ground wire directly around it, then tighten securely.
Backplate is not flush against the wall.
Adjust the decorative nuts (G) on the mounting screws (A) until the backplate (F) is snug against the wall surface.
Before use
- Shut off power at the circuit breaker.
- Verify the mounting strap (B) is level and securely attached.
- Ensure all wire connections are secure and properly insulated.
- Confirm the correct bulb type and wattage are used.
- Ensure all shades (I) are secured with socket rings (J).
Specs in practice
- Maximum Wattage
- The limit for bulb power consumption to prevent overheating; do not exceed this value.
- Neutral Wire
- Completes the circuit; identified by ribbed, white, or transparent wire with white inner thread.
Model compatibility
- Designed for wall mounting.
- Requires standard junction box installation.
- Compatible with dimmers (if using dimmable bulbs).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.