Lighting / Fixtures
Installation Guide for Golden Lighting 1140-1W Wall Sconce
Professional installation instructions for the Golden Lighting 1140-1W wall sconce, including wiring diagrams, mounting procedures, and safety guidelines.
Table of contents
Product Overview
The Golden Lighting 1140-1W is a single-light wall sconce designed for indoor use. This fixture arrives pre-assembled, requiring only mounting and electrical connection to a standard junction box. It features a versatile design suitable for various interior spaces.
Safety Information
Important: All installation work must be performed by an accredited professional. Before starting, ensure the power supply is completely shut off at the fuse or circuit breaker. Do not exceed the maximum wattage specified for the bulb.
Installation Procedure
The installation process involves preparing the junction box, securing the mounting bracket, connecting the electrical wires, and attaching the fixture backplate. An assistant is recommended to support the weight of the fixture during the wiring process.
Wiring Instructions
Identify the fixture wires and connect them to the house supply wires using the provided wire connectors. Ensure all connections are secure and twists are in the same direction. If no house ground wire is available, use the ground screw (E) on the mounting bracket to secure the fixture's ground wire.
Final Assembly
Once wired, secure the backplate (D) to the mounting bracket (A) using the provided small screws (C). Attach the glass shade (G) using the washer (J) and nut (H), adjusting the glass to your preferred angle. Finally, install the appropriate light bulb (not included) and restore power to test the fixture.
Maintenance and Support
For customer service or to arrange for replacement parts, please contact the place of purchase. For additional lighting advice and coordinating products, visit the official website at www.GoldenLighting.com.
Official resources from the manual
Manufacturer information
Golden Lighting
Practical help
Common problems
No house ground wire available in the junction box.
Locate the ground screw (E) on the mounting bracket and wrap the fixture's ground wire around it, then tighten securely.
Fixture weight is difficult to manage during wiring.
Have an assistant support the weight of the fixture while you complete the electrical connections.
Before use
- Shut off power at the circuit breaker or fuse box.
- Ensure you have the correct light bulb (not included).
- Verify the mounting bracket holes are level and parallel to the floor.
- Identify your house wires (Hot, Neutral, Ground) before connecting.
Specs in practice
- Neutral Wire
- Ribbed, white, or transparent wire with white inner thread.
Images and diagrams
- The wiring diagram illustrates the correct pairing of fixture wires to house wires using wire connectors.
- The assembly diagram shows the sequence of components (A-J) for mounting the backplate and securing the glass shade.
Model compatibility
- Fixture is designed for standard wall junction boxes.
- Ensure the bulb wattage does not exceed the fixture's maximum rating.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.