Electronics / AV Splitters
Operating Instructions for Hama Power Cube 223195
Quick guide for the Hama Power Cube 223195. Learn how to safely connect devices, understand technical specifications, and maintain your power strip.
Quick answers from the manual
Quick answer
- The Hama Power Cube 223195 is a power strip with USB charging ports. Connect it to a standard mains socket and plug your devices into the AC outlets or USB ports, ensuring total power limits are not exceeded. p. 3
Key actions
- Connect your device to a USB charging port using a suitable USB cable. p. 3
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged. p. 3
First start
- Connect the charger to a properly installed and easily accessible mains socket. p. 3
Maintenance and reset
- Disconnect the device from the mains before cleaning and during prolonged periods of non-use. Clean with a slightly damp, lint-free cloth. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input voltage | 230-250 V | Operating voltage range | p. 3 |
| Max connected load | 3680 W | Maximum power capacity | p. 3 |
Where to find it in the PDF
- Operating Instructions p. 2, 3
Table of contents
Quick guide from the manual
The Hama Power Cube 223195 is a compact power strip designed for indoor use. It provides AC power outlets and USB charging ports. Before use, ensure the total power consumption of all connected devices does not exceed 3680 W and the total USB output does not exceed 17 W.
Safety instructions
- Use the product only for its intended purpose inside buildings.
- Do not operate the product outside the power limits specified in the technical data.
- Protect the product from dirt, moisture, and overheating; use only in dry environments.
- Do not use the product if it is visibly damaged.
- Do not bend or crush the cable.
- Keep out of the reach of children.
- Do not modify the product; doing so voids the warranty.
- Never connect multiple units of this product in series.
- Disconnect the product from the power supply if it will not be used for a prolonged period.
Operation
To charge devices via the USB ports:
- Connect your device to a USB charging port using a suitable USB cable.
- Connect the charger to a properly installed and easily accessible mains socket.
- The charging process is displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Disconnect the charger from the mains connection after use.
Care and maintenance
Disconnect the device from the mains before cleaning and during prolonged periods of non-use. Clean the product only with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents. Ensure that no water enters the product.
Technical data
The device operates on a mains connection of 250 V / 16 A with a maximum connected load of 3680 W. The USB output provides 5.0 V DC / 3.4 A / 17.0 W.
Manufacturer information
Hama GmbH & Co KG
Practical help
Common problems
Device not charging
Check if the USB cable is suitable and properly connected. Ensure the total power consumption of all connected devices does not exceed 17 W.
Power strip not working
Ensure it is connected to a properly installed and accessible mains socket.
Before use
- Check for visible damage before use.
- Ensure the socket is easily accessible.
- Verify that the total power consumption of connected devices does not exceed 3680 W.
- Verify that the total USB output does not exceed 17 W.
Specs in practice
- Mains connection
- 250 V / 16 A
- Connected load
- Maximum 3680 W
Model compatibility
- Intended for indoor use only.
- Not for commercial use.
- Do not connect multiple units in series.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.