Hama USB-A Charger 19.5W User Manual

Quick guide for the Hama USB-A Charger (19.5W, QC 3.0/2.0). Includes safety instructions, operation steps, technical specifications, and maintenance tips.

Quick answers from the manual

Quick answer

This is a 19.5W USB-A charger supporting Quick Charge 3.0 and 2.0. It is suitable for worldwide use (100-240V) and automatically adjusts voltage and power for compatible devices. p. 4, 5

Key actions

Connect your device to the charger, then plug the charger into a properly installed and easily accessible mains socket. p. 5

First start

Plug the charger into a suitable mains socket and connect your device via USB-A cable. The charging process will be displayed on your device. p. 5

Problems and fixes

Function not fully supported

If you have a large number of QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

p. 5

Maintenance and reset

Clean only with soft, dry towels. Disconnect from mains before cleaning. p. 5

Technical specifications

Parameter	Value	Meaning	Pages
Input Voltage	100-240 V	Mains voltage range	p. 5
Max Output Power	19.5 W	Maximum power output	p. 5

Where to find it in the PDF

Safety Instructions p. 4
Operation p. 5
Technical Data p. 5

Table of contents

Quick guide from the manual

This Hama USB-A charger is designed for efficient charging of compatible devices using Quick Charge (QC) 3.0 and 2.0 technology. It supports a wide input voltage range (100-240V), making it suitable for worldwide use, provided you have the correct country-specific adapter.

Safety Instructions

Protect the product from dirt, moisture, and overheating; use only in dry rooms.
Do not drop the product or expose it to major shocks.
Do not modify the device; doing so voids the warranty.
Keep out of reach of children.
Do not use in the immediate vicinity of heaters or other heat sources.
Route cables to avoid tripping hazards.
Do not open the device or continue to operate if damaged.
Do not attempt to service or repair the product yourself; leave all work to qualified experts.

Operation

Connecting Devices:

Check if your device can be adequately supplied by the charger's current capacity.
Ensure the power of the connected device does not exceed 19.5W.
Connect your device to the charger.
Connect the charger to a properly installed and easily accessible mains socket.
The charging process is displayed on your device.
Disconnect the device from the charger when you wish to interrupt charging or when it is fully charged.
Disconnect the charger from the mains.

Note on QC 3.0/2.0: The charger automatically adjusts voltage and power for compatible devices. No manual settings are required. For optimal charging, your device must support QC 3.0 or 2.0.

Care and Maintenance

Use only soft, dry towels to clean the product.
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical Data

Input Voltage: 100-240V
Input AC Frequency: 50/60 Hz
Max Output Power: 19.5W
Average Efficiency: 85.5%
Power Consumption at Zero Load: 0.04W

Manufacturer information

Hama GmbH & Co KG

Brand profile

Manufacturer website https://www.hama.com Support https://support.hama.com Manufacturer manuals https://support.hama.com

Practical help

Common problems

Device not charging efficiently

Ensure your device supports QC 3.0 or 2.0. If you have many QC-enabled devices with different firmware, the function might not be fully supported.

Charger damaged

Do not use the product if the AC adapter, adapter cable, or mains cable are damaged. Do not attempt to repair it yourself.

Before use

Check if the charger is compatible with your device's power requirements.
Ensure the total power of connected devices does not exceed 19.5W.
Verify the mains voltage is between 100-240V.
Ensure the socket is easily accessible.

Specs in practice

Output Power: Maximum 19.5W total output.
Input Voltage: 100-240V, suitable for worldwide use (may require country-specific adapter).

Images and diagrams

The charger connects to a mains socket and provides power via a USB-A port to devices like smartphones or tablets.

Model compatibility

Compatible with QC 3.0 and 2.0 devices.
Requires country-specific adapter for some regions.

Show more Show less

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.