Tools / Power Tools
HiKOKI RB 18DC Cordless Blower User Manual
Quick guide for the HiKOKI RB 18DC cordless blower, covering battery installation, operation, charging, maintenance, and safety warnings.
Table of contents
Quick guide from the manual
The HiKOKI RB 18DC is a cordless blower designed for cleaning facilities and equipment in various environments. This manual provides essential instructions for safe operation, battery management, and maintenance.
Device Description
The blower features a handle, switch, air volume changing lever, ON lock button, motor and fan, blast port, nozzle, and suction port. It is powered by a Multi Volt or BSL18 series battery (sold separately).
Battery Removal/Installation
To remove the battery, hold the housing firmly and push the battery latches. To install, insert the battery while observing its polarities.
Operation
For blowing, mount the nozzle to the blast port. For dust collection, mount the nozzle to the suction port and attach the dust bag to the blast port. Use the air volume changing lever to adjust the airflow (low, medium, high).
Charging
Charge the battery using the specified charger (e.g., UC18YSL3). Connect the charger to a power source, insert the battery, and monitor the charge indicator lamp. A blinking blue light indicates charging, while a solid green light indicates charging is complete.
Maintenance and Inspection
Regularly inspect mounting screws for tightness. Keep the motor winding clean and dry. Inspect tool and battery terminals for dust and swarf. Clean the exterior with a soft, dry cloth or soapy water; do not use solvents. Store in a cool, dry place out of reach of children.
Safety
Always wear eye protection. Do not block the blast or suction ports. Never point the blower toward people or animals. Do not use in environments with flammable materials or high heat sources. If the tool overheats or operates abnormally, stop immediately and contact an authorized service center.
Manufacturer information
HiKOKI
Practical help
Common problems
Tool does not run
Check if the battery is charged and properly installed.
Tool suddenly stops
The battery may be overheated. Let it cool down.
Poor suction
Check if the dust bag is full, the nozzle is plugged, or if the nozzle is damaged.
Before use
- Ensure the work area is clean and well-lit.
- Check that the battery is fully charged and securely installed.
- Ensure the nozzle is correctly mounted for the intended operation (blowing or suction).
- Verify that the switch is in the OFF position before inserting the battery.
- Wear appropriate personal protective equipment, including eye protection.
Specs in practice
- No-Load Speed
- 0–20000 min–1
- Air Velocity (Max)
- 0–95 m/s
Model compatibility
- Compatible with HiKOKI Multi Volt batteries and BSL18 series batteries.
- Existing older batteries (BSL3660/3620/3626, etc.) are not compatible.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.