Installation Manual for Hoftronic Wall Panel 2.4GHz
Quick guide for the Hoftronic 2.4GHz Wall Panel (SKU 4406035). Includes essential safety instructions, installation steps, usage guidelines, and technical specifications.
Quick answers from the manual
Quick answer
- The Hoftronic 2.4GHz Wall Panel (SKU 4406035) is a smart home control device for indoor use. It must be installed by a qualified electrician with the power supply disconnected. p. 1
Key actions
- Installation must be performed by a qualified electrician. p. 1
- Ensure power is disconnected during installation. p. 1
First start
- Ensure power is disconnected, mount the device, check mechanical fastening and electrical connections, then restore power. p. 1
Show 3 more answers Show less
Maintenance and reset
- Clean only with soft and dry cloths. Do not use chemical detergents. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| SKU | 4406035 | Product identifier | p. 1 |
| Frequency | 2402MHz-2460MHz | Operating frequency range | p. 1 |
Where to find it in the PDF
- Installation and Safety p. 1, 2
Table of contents
Quick guide from the manual
The Hoftronic 2.4GHz Wall Panel (SKU 4406035) is a smart home control device designed for indoor use. This document provides the necessary instructions for safe installation and operation. Important: Installation must be performed by a qualified electrician in compliance with local electrical and safety regulations.
Safety instructions
- Ensure AC/Mains power is disconnected and cannot be unexpectedly reconnected during installation.
- This product must not be installed by minors or people with a mental disability.
- Observe all warnings labeled on or supplied with the product.
- Failure to follow instructions may result in fire, burns, electric shock, or physical injury.
Installation
Before mounting, read the manual carefully. All activities must be performed with the power supply cut off.
- Mounting: Follow the mounting diagram provided in the manual. Ensure proper mechanical fastening before first use.
- Electrical Connection: The product must be connected to a supply network that meets legal energy quality standards.
- IP Protection: To maintain the proper IP protection level, select the correct diameter of the power cable for the cable gland used in the product.
- Protective Lead: The product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock.
Usage and maintenance
- Indoor Use Only: The product is designed for indoor environments.
- Maintenance: Perform maintenance only when the power supply is cut off and the product has cooled down.
- Cleaning: Clean only with soft, dry cloths. Do not use chemical detergents.
- Operation: Do not cover the product. Ensure free air access. The product may heat up during operation.
- Restrictions: Do not use the product with a damaged protective cover. Avoid unfavorable conditions such as dust, water, moisture, vibrations, explosive atmospheres, or chemical fumes.
Environmental protection
This product is subject to selective collection of waste electronic and electrical equipment. Do not dispose of it with regular household waste. Return used items to a collection facility or the seller when purchasing a new product of the same type.
Manufacturer information
Hoftronic
Practical help
Common problems
Verify that the power supply is properly connected and the circuit breaker is active.
Ensure the product is not covered and has free air access.
Before use
- Ensure AC/Mains power is disconnected.
- Verify the installation is performed by a qualified electrician.
- Check for proper mechanical fastening.
- Ensure the correct cable diameter is used for the cable gland.
- Verify electrical connections before first use.
Show more Show less
Specs in practice
- Frequency band
- 2402MHz-2460MHz
- Max RF output power
- 8dBm (6.31 mW)
Model compatibility
- Indoor use only.
- Must be connected to a supply network meeting legal energy quality standards.
Manual page author
Emily Carter
User documentation editor