Instruction Manual for Home Accents Holiday 7ft Nativity Scene 22RT1492211

Quick Guide

This manual provides instructions for the assembly and maintenance of the 7ft Nativity TWINKLING LED Nativity Scene. Before beginning, ensure all parts are present according to the parts list. Assembly is recommended on a flat surface and may require more than one person. Do not overload the lighting string, which is rated at 26.4 Watts (0.22 Amps).

Assembly Instructions

Follow these steps to assemble your nativity scene:

• Assembling the Stable: Connect the Middle Sections (C) to the Lower Sections (D). Attach the Top of Stable (B) to the Middle Sections (C) and secure with Bolt & Wingnuts (V). Connect the two Top sections together and secure with Plastic Ties (U). Attach the Star (A) to the top.
• Assembling the Base Stand: Insert the rods of the Lower Sections (D) into the Left & Right Base Stands (F1 & F2) and fasten with Bolt & Wingnuts (V).
• Assembling Support Bars: Stack and lock the Stable Support Bars (E). Insert the hooked ends into the holes on the back of the Middle Section and Base Stands, then secure with Cotter Pins (T).
• Assembling Mary and Joseph: Assemble the body parts (Head, Upper Body, Lower Body, Arms) for both figures using the provided connecting rods and Plastic Ties (U).
• Attaching Figures to Stable: Insert the rods on the bottom of the figures into the matching holes on the Base Stands (F1 & F2). Secure with Plastic Ties (U). Assemble the cane (G) and place it in Joseph's hand.
• Assembling the Baby: Connect the Baby/Quilt (O) to the Baby's Bed (P). Attach the Support Bracket (Q) to the Bed and Baby's left arm, locking with a Cotter Pin (T).
• Securing to Ground: Use the Anchoring Strings (X) to secure the top of the stable to the Ground Stakes (W). Use remaining Ground Stakes to secure the base frames of the figures and the stable to the ground.

Pre-Operation and Safety

Caution: Always grasp the plug to insert or remove from the power source; do not pull on the cord. The lighting string is rated at 26.4 Watts (0.22 Amps). Do not overload or connect to other lighting strings or electrical products. Inspect the product carefully before use; discard if there are cuts, frayed wire insulation, cracks in socket enclosures, or loose connections.

Care and Cleaning

• Carefully remove the product from its location to avoid strain on connections.
• If placed somewhere other than the ground, ensure it is well secured, flat, and stable.
• Disassemble carefully, ensuring electrical wires are not cut.
• Wipe the unit with a damp cloth and allow it to dry before storing.
• Store in a cool, dry location protected from sunlight.

Troubleshooting

• Ensure the ground or surface is flat and level.
• Plug the item correctly into a wall outlet or UL Listed Power Cord.
• Verify all parts are assembled according to the manual.
• If the item does not light, check for loose or broken bulbs and connections.
• Check for a broken or burned-out fuse in the plug.
• Ensure all light string cords are plugged in if the item has multiple cords.