Installation manual for Immax 08298L and 08299L Luminaire

Quick guide from the manual

This document provides installation instructions for the Immax 08298L and 08299L luminaires. Before starting, ensure the power supply is disconnected at the circuit breaker. The installation involves mounting the bracket to the ceiling, connecting the electrical wiring, and installing an E27 bulb. Always follow the safety precautions and ensure the fixture is securely attached.

Technical parameters

• Material: Bamboo, metal
• Lamp colour: Natural brown + black
• Socket: E27
• Power: Max 40 W
• Input voltage: AC 220-230V, 50-60Hz
• Size: D60 x 40 x 20cm or D80 x 55 x 25cm
• Protection: IP20

Installation instructions

1. Turn off the main power supply before beginning the installation.
2. Drill the necessary holes in the ceiling according to the mounting bracket dimensions.
3. Insert the wall anchors into the drilled holes.
4. Secure the mounting bracket to the ceiling using the provided screws.
5. Connect the electrical wires to the terminal block on the fixture.
6. Install the E27 bulb into the socket.
7. Attach the luminaire to the mounting bracket and turn the power back on.

Maintenance and disposal

To clean the product, use only a soft, dry cloth. Do not use any abrasive or chemical cleaning products, as these may damage the surface. At the end of the luminaire's technical life, disconnect it from the power supply before disposal and hand it over to an authorized waste disposal organization.