Lighting / Work Lights
User Manual for NightSearcher Kanga Star 5K & 10K Work Light
Quick guide for the NightSearcher Kanga Star 5K and 10K work lights. Learn how to install batteries, use the AC pack, operate the brightness controls, and configure the power tool battery adapter.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The NightSearcher Kanga Star 5K and 10K are high-performance work lights designed for professional use. This manual covers the operation of the light, including battery installation, AC power usage, and the use of the transform adapter for various power tool batteries. Key features include adjustable brightness (20% to 100%), USB output, and a robust IP65-rated design.
Product Overview
The device features a handle, heat dissipation vents, a COB LED chip, brightness control buttons, a power switch, an unlock switch, a bracket, and a rubber cover. The rear panel includes a battery indicator and a USB output port.
Operation
Battery Installation: Slide the battery into the slideguide on the back of the unit. Press the switch to turn the light on and use the brightness control button to adjust the intensity (20%-40%-60%-80%-100%).
Replacing the Battery: Press the unlock switch to eject the battery automatically, then slide in a new battery.
AC Pack Usage: Slide the AC pack into the slideguide. Plug the unit into a power source. Press the switch to turn on the light and adjust brightness as needed.
Charging: To charge the battery, slide it into the AC pack and plug it in. The battery indicator lights will turn on sequentially during charging. When the green indicator is on, the battery is fully charged. Press the battery switch to check the charge level; if only the red light is on, the battery requires recharging.
Power Tool Battery Adapter
The unit supports various power tool batteries via the transform adapter. Supported brands include Hikoki, Makita, Bosch, DeWalt, Milwaukee, and Metabo. Follow the specific installation steps for your battery model (e.g., pulling up specific tabs or pressing buttons on both sides) as detailed in the adapter section. Ensure the voltage switch on the adapter is set correctly: 18V (Red indicator) or 14.4V (Green indicator). The adapter has a memory function for the voltage setting.
Specifications
Kanga Star 5K: 40W power, 5000 Lumens max, 1.48kg weight.
Kanga Star 10K: 80W power, 10000 Lumens max, 3kg weight.
General: IP65 rating, 120-degree beam angle, 4000K color temperature, and operating temperatures ranging from -20°C to 50°C (AC) or -10°C to 45°C (DC).
Manufacturer information
NightSearcher
Practical help
Common problems
Battery needs charging
If only the red light is on when pressing the battery switch, the battery requires recharging.
Voltage mismatch
Ensure the voltage switch on the adapter is set to match your battery (18V or 14.4V). The red indicator signifies 18V, and the green indicator signifies 14.4V.
Before use
- Check the battery charge level using the battery switch.
- Ensure the correct battery adapter is used for your specific power tool brand.
- Verify the voltage switch setting matches the battery voltage.
- Ensure the battery or AC pack is securely slid into the slideguide.
Specs in practice
- Burning Time
- Varies by model and brightness, ranging from 1.5 to 6 hours.
Images and diagrams
- Brightness Control: Cycles through 20%, 40%, 60%, 80%, and 100% brightness levels.
- Battery Indicator: Displays charge status; lights illuminate sequentially during charging.
Model compatibility
- Compatible with Hikoki, Makita, Bosch, DeWalt, Milwaukee, and Metabo batteries (14.4V-18V).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.