findmanualpdf.com

User manual for Partyrent Com 1755 Mobile Refrigerator 150L

Quick guide for the Partyrent Com 1755 mobile refrigerator. Learn how to safely operate, switch on, and maintain your 150L cooling unit.

Table of contents

Quick guide from the manual

This document provides essential operating instructions for the Partyrent Com 1755 mobile refrigerator. Always ensure the device is placed on a flat, horizontal surface and that ventilation openings remain unobstructed during operation.

Operating instructions

Follow these steps to operate the refrigerator:

  • Switching on: Connect the device to a power source (16A, 230V). Use the selector switch to choose the desired temperature level.
  • Switching off: Disconnect the device from the power source and empty the device completely.

Safety and maintenance

Adhere to the following safety guidelines to ensure proper operation and longevity of the device:

  • Do not place the device near flammable objects.
  • Never leave the powered device unattended.
  • Ensure the mains plug and electrical components do not come into contact with water.
  • Always have electrical installations commissioned by a specialist.
  • Do not use the device if the power cord is damaged.
  • When disconnecting, always pull the plug, not the cable.
  • Be aware that some parts may become hot during use.
  • Only transport the device when it is switched off.
  • Important: If the device was transported lying down, it must be switched off and stand upright for 24 hours to allow the refrigerant to flow back into the compressor.

Practical help

Common problems

Device was transported lying down

Switch off the device and let it stand upright for 24 hours before use to allow the refrigerant to flow back into the compressor.

Electrical components getting wet

Ensure the mains plug and all electrical components do not come into contact with water.

Before use

  • Ensure the device is placed on a flat and horizontal surface.
  • Check that the power cord is not damaged.
  • Verify the power source is 230V/16A.
  • Ensure ventilation openings are not covered.

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.