Petlibro Rainbow Automatic Pet Water Fountain PLWF004 User Manual

Quick guide from the manual

To ensure your Petlibro Rainbow Automatic Pet Water Fountain functions correctly, follow these essential steps:

• Filter Preparation: Always soak the filter in a clean bowl of water for 5 minutes before the first use to prevent water flow issues and spillage.
• Water Level: Keep the water level between the MIN and MAX marks. Never operate the fountain without water to avoid damaging the pump.
• Maintenance Schedule: Replace the filter and pre-filter sponge every 2 weeks to prevent bacteria and mold growth. Clean the pump and fountain components every 2 weeks.

Safety Precautions

Please adhere to the following safety guidelines:

• This product is for indoor use only.
• Do not allow children to play with or around the fountain.
• Always disconnect the power supply before cleaning or maintaining the device.
• Do not pull the power cord to unplug the device; pull the plug itself.
• Ensure the power adapter and wire plug remain dry during cleaning.
• If the device or plug gets wet, turn off the electricity at the wall outlet before attempting to unplug.

Product Overview

The fountain consists of several key components:

• Rainbow Top Cover
• Drinking Area
• Filter Box and Filter
• Water Pump with power cord
• Pre-filter Sponge
• Water Tank

Assembly and First Use

1. Soak the filter in a clean bowl for 5 minutes.
2. Place the filter into the filter box and close the lid.
3. Fill the water tank with water, ensuring the level is between the MIN and MAX indicators.
4. Place the cord in the designated slot.
5. Install the filter box into the tank.
6. Place the water tray and rainbow top cover to form a seal.
7. Connect the power adapter to a wall outlet.

Care and Maintenance

Regular cleaning is vital for pet health:

• Cleaning the Pump: Take off the pump cover and impeller. Use the provided small brush to clean the parts with water.
• Replacement: Replace the filter and pre-filter sponge every 2 weeks.
• General Cleaning: Clean the pump and the entire fountain every 2 weeks to prevent bacteria, mold, and insect growth.

Troubleshooting

• Water spilling: The filter may not be fully soaked. Soak it in a clean bowl for 5 minutes before use.
• Pump stops working: Ensure the water level is between MIN and MAX. If the pump runs dry, it will fail. Clean the pump, water tank, and drinking basin.
• Water output speed slows down: This is normal for the first use or after long-term storage as the pump needs to discharge air.

Specifications

• Model: PLWF004
• Power Adapter: Input 100-240V 50/60Hz, Output 5V/1A
• Material: Ceramic
• Water Tank Capacity: 1.5 L
• Dimensions: 20 x 20 x 11 cm
• Net Weight: 1.8 kg