Lighting / Fixtures
Installation Instructions for Resistex Doled Ceiling Light
Quick installation guide for the Resistex Doled ceiling light. Includes wiring diagrams, mounting steps, safety precautions, and maintenance instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Resistex Doled is a ceiling light fixture that requires professional installation. Ensure the power is disconnected before starting any work. The installation involves specific wiring connections for warm and cool light settings and requires precise ceiling cutout dimensions.
Safety notes
- Never work when voltage is present on the luminaire.
- The installation must be performed by a professional installer in compliance with electrical standards and regulations.
- Risk of electrostatic discharges (ESD). Handle with precautions.
- Do not cover the luminaire.
Installation
The installation process requires connecting the power supply to the LED driver and securing the fixture into the ceiling using the provided spring clips.
Wiring
Follow the color coding for the wiring connections:
- White: Warm -
- Yellow: Warm +
- Black: Cool -
- Red: Cool +
Ensure the AC input is connected correctly to the driver (N and L terminals).
Mounting
The fixture is held in place by spring clips. Ensure the cutout in the ceiling matches the required diameter for your specific model version. Do not force the clips; ensure they are properly positioned to hold the fixture flush against the ceiling surface.
Maintenance
- Do not use chemicals or abrasive products to clean the fixture.
- Keep these instructions for dismantling or future maintenance.
- For additional information, visit the manufacturer website at www.resistex-sa.com.
Official resources from the manual
Practical help
Common problems
Light not turning on
Verify that the AC power is connected correctly to the N and L terminals and that the LED driver connections (Warm/Cool) are secure.
Electrostatic discharge risk
Handle the luminaire with precautions as per ESD norms during installation.
Before use
- Ensure the power supply is turned off.
- Verify the ceiling cutout diameter matches the fixture requirements.
- Ensure a professional installer is performing the work.
- Check that the wiring matches the color codes (White/Yellow/Black/Red).
Images and diagrams
- Wiring diagram shows the connection between the AC power source and the LED driver, and the specific color-coded outputs for the LED module.
- Mounting diagram illustrates the use of spring clips to secure the fixture into the ceiling cutout.
Model compatibility
- The installation requires specific cutout diameters depending on the model version (e.g., 155mm, 160mm, 195mm).
- Do not cover the luminaire.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.