Lighting / Fixtures
Installation Instructions for Resistex Neoled LED Strip
A quick installation guide for the Resistex Neoled LED strip. This manual covers safety precautions, professional installation steps, wiring instructions, and bathroom zone compliance for model 1349LM.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential installation and safety instructions for the Resistex Neoled LED strip. Key requirements include:
- Professional Installation: The fixture must be installed by a professional in compliance with electrical standards.
- Safety First: Never work on the luminaire while it is under voltage.
- ESD Precautions: Handle the device with care to avoid electrostatic discharges.
- Maintenance: Do not use chemicals or abrasive products for cleaning.
Safety notes
Always ensure the power supply is disconnected before starting any work on the luminaire. The installation must be performed by a qualified professional. Please handle the product with precautions due to the risk of electrostatic discharges (ESD Norm).
Installation
Follow these steps to install the Neoled fixture:
- Preparation: Ensure the power is turned off at the main breaker.
- Drilling: Drill mounting holes as indicated in the diagram (6mm diameter).
- Mounting: Secure the base to the surface.
- Wiring: Connect the electrical supply to the terminal block, ensuring correct L (Live) and N (Neutral) connections.
- Final Assembly: Attach the fixture to the base and secure it.
Dimensions and bathroom zones
The fixture has a total length of 667mm with a mounting hole distance of 451mm. When installing in a bathroom, please refer to the volume zone diagrams provided in the manual to ensure the fixture is placed in a safe location (Volume 0, 1, or 2) according to local regulations.
Maintenance
To maintain the fixture, clean it only with a soft cloth. Do not use chemicals or abrasive products. Keep these instructions for future dismantling or maintenance needs.
Practical help
Common problems
Electrostatic discharge risk
Handle the luminaire with precautions during installation.
Cleaning the fixture
Do not use chemicals or abrasive products; use a soft cloth.
Before use
- Ensure the power supply is turned off
- Verify the installation is performed by a professional
- Check the mounting surface for drilling (6mm holes)
- Confirm the installation location complies with bathroom volume zones
- Ensure correct L and N wiring connection
Specs in practice
- Total Length
- 667mm
- Mounting Hole Distance
- 451mm
Images and diagrams
- The diagram illustrates bathroom volume zones (0, 1, 2) to guide safe placement.
- Steps 1-11 provide a visual sequence for drilling, mounting, and wiring the fixture.
Model compatibility
- Must be installed by a professional installer.
- Complies with ESD norms.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.