Xtrem Bots SAM Robotic Friend User Manual
Comprehensive assembly and maintenance guide for the Xtrem Bots SAM robotic toy, including safety warnings, battery requirements, and step-by-step construction instructions.
Table of contents
Manual images
Jump to the sectionProduct Overview
SAM is an interactive robotic friend designed for children aged 8 and up. This STEM-focused toy encourages building, coding, and play. The product is intended for indoor use only and must be assembled by an adult. Please read all instructions carefully before the first use to ensure a safe and enjoyable experience.

Safety and Precautions
Safety is paramount when using this robotic toy. Please adhere to the following guidelines:
- Do not pick up the robot while it is in motion.
- Keep hands, hair, and clothing away from the tires and moving parts when the power switch is in the ON position.
- Avoid collisions with people, animals, or household furniture.
- The toy is not suitable for children under 3 years old due to small parts that pose a choking hazard.
- Use the product only in domestic areas such as the house or garden.
Battery Information
Proper battery management is essential for the longevity of the robot:

- The robot requires 4 x 1.5V AA/LR6 batteries (not included).
- Battery replacement must be performed by an adult.
- Always insert batteries with the correct polarity.
- Do not mix old and new batteries, or different types of batteries (alkaline, standard, or rechargeable).
- Remove batteries if the toy will not be used for an extended period.
- Exhausted batteries should be removed from the toy immediately.
Care and Maintenance
To keep your robot in optimal condition, follow these maintenance tips:
- Wipe the toy gently with a clean, damp cloth.
- Keep the robot away from direct heat sources.
- Do not submerge the toy in water, as this will damage the electronic components.
- Regularly check the plug and other parts for signs of damage. If damage is found, do not use the product until it has been repaired.
- If the robot malfunctions due to electrostatic discharge, simply reset it by turning it off and on again.
Assembly Tips
The robot requires assembly before use. Cut plastic parts from the frame only when they are needed. Remove any burrs or sharp edges before assembling the pieces to ensure a smooth fit. Use a Philips screwdriver for assembly (not included).
Disposal and Recycling
When the toy reaches the end of its life, please dispose of it responsibly. Remove all batteries and dispose of them separately according to local regulations. Take electronic components to a designated collection point for waste electrical and electronic equipment (WEEE).
Manufacturer information
Ruko
Practical help
Common problems
Reset the toy by turning it off and on again. Check if batteries are exhausted and replace if necessary.
Replace all 4 batteries with new ones of the same type.
Before use
- Read the user information with your child.
- Ensure an adult is present for assembly.
- Check that all parts are undamaged.
- Have a Philips screwdriver ready.
- Ensure you have 4 new 1.5V AA/LR6 batteries.
Specs in practice
- Power Supply
- Requires 4 x 1.5V AA/LR6 batteries.
Images and diagrams
- Page 10 shows the full list of components labeled A1 through R10.
- Page 11 details the required tools and assembly tips.
- Pages 12-17 provide step-by-step visual guides for assembling the robot's body, arms, and battery compartment.
Model compatibility
- For indoor use only.
- Not suitable for children under 3 years old.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.