Power / Batteries Chargers
Instruction Manual for Scosche 142QFG2N1W Folding 2-in-1 Wireless Charging Travel Stand
Quick guide for the Scosche 142QFG2N1W MagicMount Travel stand. Learn how to set up your charging configurations, understand power requirements, and view technical specifications for this 2-in-1 wireless charger.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
The Scosche MagicMount Travel is a folding 2-in-1 wireless charging stand designed for portability. To operate the device, you must use a USB-C wall charger with a power output of at least 20W (not included). The device includes the charging stand and a 4 ft. premium braided USB-C cable with a right-angle connector.
Overview
The device features three main components:
- MagSafe Compatible Charger: Designed for iPhone 12 and later models.
- USB-C Port: Located on the device to receive power via the included cable.
- Wireless Charging Pad: Located on the base, intended for AirPods charging cases or other compatible wireless devices.
Charging Stand Configurations
The stand can be used in three primary configurations:
- Upright Folded Charging Stand: Charges an iPhone and AirPods simultaneously. Note: Upright charging requires an AirPods Pro case with MagSafe (October 2021 or later).
- Flat Folded Charging Pad: Used for charging an iPhone only.
- Flat Unfolded Charging Pad: Used for charging an iPhone and an AirPods case simultaneously.
Technical Specifications
- USB-C Input: 9V = 2.22A, 20W
- Wireless Output 1: 10W Max.
- Wireless Output 2: 5W Max.
Safety and Compliance
This device complies with part 15 of the FCC Rules and Canadian RSS standards. It is designed for residential use. Ensure a minimum distance of 20cm between the radiator and your body during operation. Do not co-locate or operate this transmitter in conjunction with any other antenna or transmitter.
Contact Information
Scosche Industries, 1550 Pacific Avenue, Oxnard, California 93033. Phone: 800-363-4490 x1 / 805-486-4450 x1. Website: www.scosche.com
Official resources from the manual
Manufacturer information
Scosche Industries, Inc.
Practical help
Common problems
Device not charging or charging slowly
Ensure you are using a USB-C wall charger with at least 20W of power output. The device will not function correctly with lower-wattage chargers.
Upright charging not working for AirPods
Upright charging is specifically designed for AirPods Pro cases with MagSafe (October 2021 and later). Ensure your case model is compatible.
Before use
- Verify you have a 20W+ USB-C wall charger (not included).
- Check that your iPhone is model 12 or later for MagSafe compatibility.
- Ensure the USB-C cable is securely connected to the stand's port.
- Confirm your AirPods case is compatible with wireless charging.
Specs in practice
- USB-C Input 9V/2.22A
- The power requirement needed from your wall adapter to support full charging speeds.
- Wireless Output 1 (10W)
- Maximum power delivered to the primary MagSafe charging surface.
- Wireless Output 2 (5W)
- Maximum power delivered to the secondary base charging pad for accessories.
Images and diagrams
- The manual provides a visual breakdown of the stand's folding mechanism, showing how to transition between upright and flat configurations.
- The inset diagram illustrates the correct orientation of the right-angle USB-C connector when plugging into the stand.
Model compatibility
- MagSafe charger is compatible with iPhone 12 and later.
- Upright charging requires AirPods Pro case with MagSafe (October 2021 & later).
- Flat charging pad works with standard wireless charging cases.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.