Home Appliances / Small Kitchen Appliances
User Manual for Sencor SHP 0450BK Multi-groomer
Quick guide for the Sencor SHP 0450BK multi-groomer. Learn how to charge, use, clean, and maintain your device for optimal performance.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Sencor SHP 0450BK is a multi-groomer designed for trimming beards, nose hair, and ear hair. It is intended for indoor, domestic use only. Important: Do not use the device in the shower or bath, and do not submerge the handle in water. Ensure the device is used only on dry, clean hair.
Device Description
The set includes the main handle, a cutting unit, three comb attachments (1mm, 3mm, 5mm), a USB charging cable, a power adapter, and a cleaning brush.
Charging
The device can be charged using the provided USB adapter or an external USB source (computer, power bank). The charging indicator will flash during the process and remain lit once fully charged. A full charge takes approximately 2 hours and provides up to 45 minutes of cordless operation. Do not leave the device connected to the power source longer than necessary.
Usage
Before use, ensure the cutting unit and accessories are clean and undamaged. Attach the desired comb to the cutting unit. Turn the device on using the switch. Move the trimmer slowly against the direction of hair growth, keeping the cutting unit in full contact with the skin. Turn off the device after use.
Cleaning and Maintenance
Turn off the device before cleaning. Use the provided brush to remove hair from the cutting unit and the interior area. The cutting unit and accessories can be rinsed under warm water, but ensure they are completely dry before reattaching. Never rinse the handle under running water or submerge it.
Safety Warnings
- Do not use the device if the power cable is damaged.
- Keep the device and cable away from heat sources and sharp objects.
- Do not attempt to remove the built-in battery yourself; this must be done by a professional service center.
- Store the device in a dry place, out of reach of children.
- Do not use the device on wet beards or if you have open wounds/blisters on the skin.
Technical Specifications
- Battery: Li-ion, 3.7 V, 500 mAh
- Charging: 100-240 VAC, 50/60 Hz, 0.2 A (Input); 5 VDC, 1 A, 5 W (Output)
- Noise Level: 72 dB(A)
- Protection Class: II (Double insulation)
- Ingress Protection: IP20
Manufacturer information
Sencor
Practical help
Common problems
Device does not turn on or run
Ensure the battery is charged. If the battery is empty, connect it to a power source for approximately 2 hours.
Poor cutting performance
Clean the cutting unit and the area underneath it using the brush. Ensure the comb attachment is correctly seated.
Indicator light not working
Check the USB connection to the power source and ensure the cable is properly connected to the device.
Before use
- Ensure beard or hair is dry and clean.
- Check that the cutting unit and selected accessory are not damaged.
- Verify the battery is charged.
- Ensure the device is not being used in a bathroom or near water.
Specs in practice
- Charging Time
- Approximately 2 hours for a full charge.
Images and diagrams
- Page 4 illustrates the main components, including the cutting unit, handle, switch, indicator, charging port, and the three comb sizes (1mm, 3mm, 5mm).
- Page 5 shows the procedure for removing and attaching the cutting head.
Model compatibility
- For indoor use only.
- Not intended for professional or commercial use.
- Do not use on animal fur.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.