User Guide for Shelly Pro Dimmer 0/1-10V PM

Quick guide from the manual

The Shelly Pro Dimmer 0/1-10V PM is a smart, DIN-mountable controller designed to manage dimming drivers via Wi-Fi or Bluetooth. Installation must be performed by a qualified electrician. Key operations include connecting the device to your local network, configuring it via the web interface or Shelly Smart Control app, and managing your lighting remotely.

Safety information

Warning: Risk of electric shock. Installation must be performed by a qualified electrician. Before making any changes to connections, ensure there is no voltage present at the device terminals.

• The device must be secured by a cable protection switch (EN60898-1, tripping characteristic B or C, max 16A).
• The device is intended for indoor use only.
• Keep the device away from dirt and moisture.
• Do not use the device if it shows any signs of damage or defect.

Installation instructions

For installation, it is recommended to use solid single-core wires or stranded wires with ferrules. Wires should have insulation with increased heat resistance, not less than PVC T105°C.

1. Turn off the circuit breakers before installing the device.
2. Use a suitable test device to ensure there is no voltage on the wires.
3. Connect the Live wire to the device L terminal and to the device I terminal.
4. Connect the Neutral wire to the device N terminal and to the LED driver N terminal.
5. Connect the device relay output O to the LED driver L terminal.
6. Connect the device positive output (+) to the LED driver positive input (Dim+).
7. Connect the device negative output (-) to the LED driver negative input (Dim-).
8. Connect switches or buttons to the device SW1 and SW2 terminals and the Live wire.

Operation and configuration

The device features an embedded web interface accessible at http://192.168.33.1 when connected to the device access point, or via its IP address when connected to your local network.

• Factory Reset: Press and hold the Reset/control button for 10 seconds.
• Enable AP/Bluetooth: Press and hold the Reset/control button for 5 seconds.
• Shelly Cloud: The device can be monitored and controlled via the Shelly Smart Control mobile application or any internet browser at https://control.shelly.cloud/.

Specifications

• Power supply: 110-240 V
• Max switching current: 16 A
• Mounting: DIN rail
• Ambient temperature: -20°C to 40°C
• Wi-Fi Protocol: 802.11 b/g/n
• Bluetooth Protocol: 4.2

Troubleshooting

If you encounter issues with installation or operation, please visit the official knowledge base at https://shelly.link/pro_dimmer_0/1-10V_PM for detailed support and documentation.