Installation Guide for Style Selections 1211MR-28-242 28-Inch Mirror

Quick guide from the manual

This mirror can be mounted either vertically or horizontally. The estimated installation time is 10 minutes. Before beginning, ensure you have all parts and the necessary tools. If any parts are missing or damaged, do not attempt to install the product.

Package contents

• Mirror (A)
• Mounting Hanger (B) - preassembled to mirror
• Anchor (AA) - Qty 2
• Screw (BB) - Qty 2
• Touch Up Pen (CC) - Qty 1

Preparation and tools

Tools required (not included): Phillips screwdriver, utility knife or scissors.

Helpful tools (not included): Measuring tape, level.

Installation instructions

1. Measure the distance between the holes in the mounting hangers (B) on the back of the mirror (A).
2. Measure and mark the location for the mounting hardware on the wall using the measurement from step 1. Ensure the marks are level and at the desired height. Note: Allow height clearance along the bottom of the mirror for your faucet if necessary.
3. If the wall is drywall, screw anchors (AA) flush into the wall. Insert screws (BB) into the anchors, leaving approximately 1/4 inch protruding from the wall. If the wall is not drywall, use appropriate mounting hardware for your specific wall type.
4. With the assistance of another adult, lift the mirror (A) to the wall and hang the mounting hangers (B) onto the screws (BB).

Care and maintenance

• Dust the frame regularly with a soft, non-lint producing cloth or household dusting product.
• Clean the mirror frame with a gentle, non-abrasive household cleaner. Dry the wood immediately with a soft cloth or towel.
• Clean the glass using standard household glass cleaning agents.
• Use the touch-up pen (CC) for scratches by stroking in the direction of the scratch, or for worn areas by stroking in the direction of the wood grain. Rub off excess colorant promptly with a soft cloth.