Automotive / Car Audio
User Guide for Taramps SL 1K6 Speaker
Quick guide for the Taramps SL 1K6 subwoofer, featuring technical specifications, cabinet volume suggestions, dimensions, and warranty terms.
Quick answers from the manual
Quick answer
- The Taramps SL 1K6 is an 18-inch subwoofer with 800W RMS power, available in 4 or 8 Ohms. It requires professional installation and specific cabinet volumes for optimal performance. p. 1
Key actions
- Install the speaker in a cabinet with the recommended volume (125L, 145L, or 180L) and use a cotton or glass wool blanket. p. 1
Problems and fixes
Coil burned
Avoid excessive power or extreme distortion conditions.
p. 2Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| RMS Power | 800 W | Continuous power handling | p. 1 |
| Frequency Response | 28 to 1300 Hz | Operating frequency range | p. 1 |
Where to find it in the PDF
- Specifications and Dimensions p. 1
- Warranty Information p. 2
Table of contents
Quick guide from the manual
The Taramps SL 1K6 is an 18-inch subwoofer designed for sub-bass and bass reproduction in car audio and professional sound systems. This guide provides the essential technical parameters and installation recommendations required for optimal performance.
Technical specifications
Electric parameters
- RMS Power: 800 W
- Musical Program Power: 1,600 W
- Nominal Impedance: 4 or 8 Ohms
- Frequency Response: 28 to 1300 Hz
- Sensitivity: 93,552 dB (@ 1W, 1 m)
Mechanical parameters
- Nominal Diameter: 18 Inches
- Weight: 12,3 Kg
- Coil Diameter: 4 Inches
- Housing Material: Aluminum
Cabinet suggestions
For optimal performance, the manufacturer recommends the following vented box configurations:
- 125 Liters: 4 ducts, 4" diameter, 310.6 mm depth, 44 Hz syntony
- 145 Liters: 4 ducts, 4" diameter, 324.6 mm depth, 40 Hz syntony
- 180 Liters: 4 ducts, 4" diameter, 264.9 mm depth, 38 Hz syntony
Note: For professional lines, it is mandatory to use a cotton or glass wool blanket inside the cabinet.
Warranty information
The product has a 15-month warranty. The product must be installed correctly by a specialized professional. The warranty does not cover:
- Damages caused by transport, handling accidents, or humidity.
- Defects caused by improper installation.
- Malfunctions such as torn cones, dust caps, or bent speaker housing.
- Coils burned by excessive power or extreme distortion conditions (heating above 240º).
Practical help
Common problems
Coil burned out
Ensure the amplifier power is within limits and avoid extreme distortion conditions that cause heating above 240º.
Warranty voided
Ensure installation is performed by a specialized professional and retain the original invoice with the serial number.
Before use
- Verify that the speaker impedance (4 or 8 Ohms) matches your amplifier.
- Select a cabinet volume (125L, 145L, or 180L) based on the provided suggestions.
- Ensure the installation is performed by a specialized professional.
- Use a cotton or glass wool blanket inside the cabinet for professional applications.
- Check that the product label with the serial number is intact.
Specs in practice
- Frequency Response
- The range of frequencies the speaker can reproduce (28 to 1300 Hz).
- Nominal Impedance
- The electrical resistance of the speaker, available in 4 or 8 Ohms versions.
Images and diagrams
- The dimensions diagram illustrates the physical size of the speaker (460mm diameter, 215mm height).
- The cabinet suggestion table provides specific duct depths and syntony frequencies for different enclosure volumes.
Model compatibility
- Designed for car sound systems and professional performance systems (bands, concerts, theaters, etc.).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.