Automotive / Car Audio
Installation Guide for Chevrolet Monte Carlo 2000-Up (Scosche GM1583)
Quick installation guide for the Scosche GM1583 kit in a 2000-Up Chevrolet Monte Carlo. Includes step-by-step instructions for radio removal, front door and rear deck speaker installation, and technical specifications.
Quick answers from the manual
Quick answer
- This manual provides installation instructions for the Scosche GM1583 kit in a 2000-Up Chevrolet Monte Carlo, covering radio removal and speaker replacement. p. 1, 2
Key actions
- Disconnect the negative battery cable before starting any installation. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Front Speaker Size | 6.5 inch | 4-hole pincushion driver | p. 1, 2 |
| Rear Speaker Size | 6x9 inch | Standard factory size | p. 1, 2 |
Where to find it in the PDF
- Technical Specifications and Diagrams p. 1
- Installation Instructions p. 2
Table of contents
Manual images
Click an image to enlargeQuick Guide
This document provides installation instructions for the Scosche GM1583 kit in a 2000-Up Chevrolet Monte Carlo. Before beginning, disconnect the negative battery cable. Ensure you have the necessary tools, including a Phillips screwdriver, Torx drivers (#30 and T15), a panel removal tool, and a 10mm socket/wrench.
Radio Removal and Installation
The factory radio provision is for a GM oversized radio. An installation kit is recommended for aftermarket installations.
- Extract (1) Phillips head screw from the glove box.
- Remove the cylinder cover from around the ignition keyhole.
- Extract (2) Phillips head screws from beneath the steering column plate and remove the cover.
- Remove the fuse access cover and extract (1) Phillips head screw from behind it.
- Adjust the steering wheel column down, remove the dash trim bezel, disconnect the hazard switch, and remove the panel.
Front Door Speaker Installation
The factory speaker provision is for a 6.5-inch 4-hole pincushion driver with a 1.25-inch tweeter. An adapter is required for aftermarket speaker installations.
- Extract (2) #30 Torx screws from the door armrest.
- Remove (3) push-pin style fasteners at the back edge of the door panel.
- Use a panel removal tool to unsnap the door panel, lift away, disconnect, and remove.
- Extract (4) T15 Torx screws from the speaker, disconnect, and remove.
Rear Deck Speaker Installation
The factory speaker provision is for a standard 6x9-inch speaker mounted in a factory adapter. An adapter is required for aftermarket 5.25-inch or 6.5-inch speaker installations.
- Fold both rear seats down and extract (4) 10mm screws from behind the seat cushion.
- Fold the seat up, remove the bottom seat cushion by pressing down on the front and pulling up, then extract (2) 10mm bolts holding the upper seat cushion and remove.
- Use a panel removal tool to extract (3) plastic fasteners holding the front of the rear deck, pull upwards, and remove.
- Extract (4) Phillips head screws from the speaker, disconnect, and remove.
Technical Specifications
- Front Door Speakers: 6.5-inch 4-hole pincushion driver with 1.25-inch tweeter.
- Rear Deck Speakers: Standard 6x9-inch speakers.
- Antenna: Located in the glass of the rear window.
Manufacturer information
Scosche Industries, Inc.
Practical help
Common problems
Factory radio is oversized
Use the Scosche GM1583 installation kit to fit an aftermarket radio.
Aftermarket speaker fitment
Adapters are required for aftermarket speakers in both the front doors and rear deck.
Before use
- Disconnect the negative battery cable
- Have a panel removal tool available
- Prepare Phillips screwdriver
- Prepare #30 and T15 Torx drivers
- Prepare 10mm socket/wrench for rear seat removal
Specs in practice
- Front Door Speakers
- 6.5-inch 4-hole pincushion driver with 1.25-inch tweeter
- Rear Deck Speakers
- Standard 6x9-inch factory size
Images and diagrams
- Dash removal diagram shows screw locations for the glove box, steering column, and fuse cover.
- Door panel diagram illustrates the location of armrest screws and push-pin fasteners.
- Rear deck diagram shows the location of seat cushion bolts and deck fasteners.
Model compatibility
- Compatible with 2000-Up Chevrolet Monte Carlo 2 Door Coupe.
- Factory antenna is located in the rear window glass.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.