Lighting / Fixtures
Tecnolite 12FTLLED014MV30N LED Pendant Lamp Instruction Manual
Quick guide for the Tecnolite 12FTLLED014MV30N LED pendant lamp, covering installation steps, electrical connection, safety precautions, and technical specifications.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides essential installation and safety instructions for the Tecnolite 12FTLLED014MV30N LED pendant lamp. The fixture is designed for outdoor use (IP54, IK07). Ensure the power is disconnected before starting any installation or maintenance work.
Installation
The installation process involves mounting the base to the ceiling and connecting the electrical wiring. Always maintain a minimum distance of 0.50 m from any combustible material.
- Secure the mounting bracket to the ceiling using the provided hardware (anchors and screws).
- Prepare the electrical wiring at the ceiling junction.
- Connect the fixture wires to the power supply lines (Line, Neutral, and Ground). Ensure the ground connection is physical. Use the provided insulating tube and wire connectors.
- Attach the lamp canopy to the mounting bracket and secure it with the side screws.
- Attach the pendant lamp body to the chain.
Safety and Maintenance
The lamp and its internal parts may become hot during operation. Allow the fixture to cool down before performing any maintenance. Clean the luminaire and its internal parts with a dry rag. Periodically check all connections to ensure they remain secure.
Technical Specifications
- Power supply: 100 V - 240 V, 50/60 Hz
- Power consumption: 12 W
- Current: 0.12 A - 0.05 A
- Protection rating: IP54, IK07
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture overheating
Ensure the lamp is installed at least 0.50 m away from combustible materials and allow it to cool before handling.
Electrical connection issues
Verify that the ground connection is physical and that all wires are securely fastened using the provided connectors.
Before use
- Ensure the power source is disconnected.
- Verify that the installation surface is suitable for the fixture weight.
- Check that you have all parts: screws, anchors, washers, connectors, and insulating tube.
- Ensure you have the necessary tools: drill, screwdriver, and protective gloves.
Images and diagrams
- Step 1: Mounting the canopy base to the ceiling.
- Step 2: Drilling and securing the bracket with anchors and screws.
- Step 3: Wiring diagram showing Line, Neutral, and Ground connections.
- Step 4: Final assembly of the lamp body to the ceiling canopy.
Model compatibility
- The fixture is designed for 100-240V power supplies.
- Not suitable for voltages higher or lower than those specified on the product label.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.