Lighting / Fixtures
Tecnolite 12YSNLED021MV Adjustable LED Track Spot Lamp Instruction Manual
Quick guide for the Tecnolite 12YSNLED021MV LED track spot lamp, covering installation steps, CCT color temperature selection, safety precautions, and maintenance.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides essential installation and operation instructions for the Tecnolite 12YSNLED021MV LED track spot lamp. Key procedures include mounting the lamp to the track system, adjusting the color temperature (CCT), and maintaining the unit safely.
Installation
Before starting, ensure the power supply is disconnected. The luminaire must be installed at a minimum distance of 0.50 m from any combustible material to prevent fire hazards.
- Step 1: Insert the lamp base into the track and rotate to lock it into position.
- Step 2: To remove or reposition, rotate the base to unlock it from the track before sliding it to a new location.
- Step 3: Do not slide the lamp while it is locked in the track; always unlock, remove, and re-insert at the desired position.
CCT Settings
The lamp features a CCT selector switch located on the housing, allowing you to choose between three color temperatures:
- WW: Warm white (3000 K)
- NW: Neutral white (4000 K)
- CW: Daytime lighting (6500 K)
Safety and Maintenance
The lamp and its parts can become hot during operation. Always use a clean rag and gloves when handling the unit to avoid burns. Clean the luminaire and its internal parts periodically with a dry rag. Ensure all connections are secure during maintenance.
Technical Specifications
- Power Supply: 100 V - 240 V ~ 50/60 Hz
- Power: 12 W
- Current: 0.13 A - 0.05 A
- Lamp Type: LED
Manufacturer information
Tecnolite
Practical help
Common problems
Lamp is stuck in the track
Ensure the base is fully rotated to the unlocked position before attempting to slide or remove it from the track.
Risk of burns during adjustment
The lamp housing becomes hot during use. Always wear gloves or use a clean rag when adjusting the position or CCT switch.
Before use
- Disconnect the electric power source before installation or maintenance.
- Verify that the installation location is at least 0.50 m away from combustible materials.
- Check that the power supply voltage matches the product label (100 V - 240 V).
- Ensure the track system is compatible with the lamp base.
Specs in practice
- CCT (Correlated Color Temperature)
- Determines the color appearance of the light: 3000 K (Warm), 4000 K (Neutral), 6500 K (Daylight).
Images and diagrams
- Step 1 shows the insertion and locking mechanism into the track.
- Step 2 illustrates the unlocking and removal process.
- Step 3 highlights the correct method of repositioning the lamp by removing and re-inserting it, rather than sliding it while locked.
Model compatibility
- Designed for indoor use only.
- Not suitable for use with constant voltage levels outside the range specified on the product label.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.