Lighting / Fixtures
Tecnolite 12YSNLED022MV Steerable Surface Mounted LED Spot Lamp Instruction Manual
Quick guide for the Tecnolite 12YSNLED022MV LED spot lamp, covering installation steps, electrical wiring, CCT color temperature selection, and safety precautions.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides essential installation and configuration instructions for the Tecnolite 12YSNLED022MV surface-mounted LED spot lamp. It is intended for indoor use only. Ensure the power is disconnected before starting any installation or maintenance work.
Installation
Follow these steps to mount the fixture:
- Secure the mounting bracket to the ceiling using appropriate anchors and screws (not included).
- Connect the electrical wires according to the wiring diagram. Ensure the ground connection is physical.
- Select the desired color temperature (CCT) using the selector switch on the fixture.
- Attach the lamp body to the mounting bracket and secure it in place.
Safety and Maintenance
- The fixture must be installed at a minimum distance of 0.50 m from any combustible material to avoid fire hazards.
- The lamp and other parts of the luminaire may become hot during operation; allow them to cool before handling.
- Clean the luminaire and its internal parts periodically with a dry rag.
- Ensure all connections are checked during maintenance.
Technical Specifications
- Power supply: 100 V - 240 V ~ 50 Hz/60 Hz
- Power: 12 W
- CCT Selector: WW (3000 K), NW (4000 K), CW (6500 K)
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture gets hot during operation
This is normal; allow the luminaire to cool down before handling or cleaning.
Fire hazard risk
Ensure the fixture is installed at least 0.50 m away from any combustible materials.
Before use
- Ensure the power supply is disconnected before installation.
- Verify that you have appropriate anchors and screws for your ceiling type.
- Confirm the ground connection is physical.
- Select the desired color temperature (CCT) before final mounting.
Specs in practice
- CCT Selector
- Allows switching between Warm White (3000 K), Neutral White (4000 K), and Cool White (6500 K).
- Input Voltage
- Supports a wide range from 100 V to 240 V.
Images and diagrams
- Step 1: Mounting bracket installation using anchors.
- Step 2: Wiring diagram showing Line, Ground, and Neutral connections.
- Step 3: CCT selector switch location and final fixture attachment.
Model compatibility
- For indoor use only.
- Not suitable for constant voltage work outside the specified range.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.