Home / Water Detectors
User Manual for Tesla 162588WLESS Wireless Charger
Quick start guide for the Tesla 162588WLESS wireless charger. Learn how to use wired and wireless charging, check battery status, and understand LED indicators.
Table of contents
Quick Start Guide
This guide covers the operation of the Tesla 162588WLESS mobile power supply, including wired and wireless charging procedures.
Power Status
To check the remaining battery capacity, press the power button quickly. The LED indicators will show the charge level at 25%, 50%, 75%, and 100%.
Wireless Charging
To initiate wireless charging:
- Place the rear side of the wireless charger on the device to be charged.
- Press and hold the power button for 3 seconds.
- The first LED will remain on during charging.
- The device will turn off after 30 seconds if no wireless charging device is detected or if a foreign object is detected.
Wired Charging
Charging your device: Connect the cable to the USB-A port on the wireless charger and connect the USB-C plug to your mobile device. Press the power button quickly to activate output charging.
Charging the power bank: Connect the cable to the USB-C port on the wireless charger and connect the USB-A plug into a power supply.
Technical Specifications
- Product Name: Mobile Power Supply
- Rated Capacity: 10000mAh/38.5Wh
- Input: 5V/2.0A (Type-C)
- Output: 5V/2.0A; 9V/2.0A (USB-A)
- Wireless Output Power: 5W; Maximum Fast Charging Support: 10W
- Dimensions: 141.5 x 70 x 160mm
Practical help
Common problems
Wireless charging stops automatically
The device turns off if no wireless charging device is detected or if a foreign object is detected.
Wireless charging does not start
Ensure you press and hold the power button for 3 seconds to initiate the wireless charging mode.
Before use
- Check battery level by pressing the power button quickly
- Ensure the device is compatible with wireless charging
- Use the USB-A port for charging external devices
- Use the USB-C port for recharging the power bank itself
Specs in practice
- Rated Capacity
- 10000mAh/38.5Wh total battery capacity.
- Wireless Output
- Supports 5W standard and up to 10W fast charging.
Images and diagrams
- The diagram illustrates the port layout and LED indicator locations.
- The power button is used for both checking status and activating wireless charging.
Model compatibility
- Supports wireless charging devices.
- Requires USB-C cable for recharging the power bank.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.