findmanualpdf.com

Portable Electric Convector Heater TESY CN204ZF

Quick guide for the TESY CN204ZF portable electric convector heater. Learn about installation, operation, safety precautions, and maintenance.

Quick answers from the manual

Quick answer

  • The TESY CN204ZF is a portable electric convector heater with 2000W max power, adjustable thermostat, and turbo function. It is designed for domestic heating in well-insulated rooms. p. 1, 4

Key actions

  • Install feet p. 4
  • Adjust temperature p. 4

First start

  • Install feet, place on a flat surface, and connect to power. p. 4

Problems and fixes

Heater emits smoke/odor

Normal during first use; will disappear.

p. 4

Maintenance and reset

  • Clean ventilation openings regularly with a vacuum cleaner. p. 3, 5

Technical specifications

Parameter Value Meaning Pages
Power 2000W Maximum power output p. 5

Where to find it in the PDF

  • Installation p. 4
  • Technical Specs p. 5
Table of contents

Manual images

Click an image to enlarge

Quick guide from the manual

The TESY CN204ZF is a portable electric convector heater designed for domestic use in well-insulated rooms. It features adjustable power settings, a thermostat for temperature control, and a turbo function for faster heating.

Safety measures

  • Do not cover the appliance to avoid overheating and fire risk.
  • Keep flammable materials (furniture, curtains, etc.) at least 100 cm away.
  • Do not use in bathrooms, near showers, or swimming pools.
  • Keep away from children under 3 years old unless supervised.
  • Always unplug the appliance when not in use.
  • Do not use with external timers or programming devices that switch it on automatically.

Installation

The appliance is intended for floor use only. Before use, you must install the feet:

Feet installation diagram
Feet installation diagram
  • Attach the feet to the base of the heater using one screw for each foot.
  • Ensure the feet are properly aligned at both ends of the heater.
  • Use a screwdriver (not included) to secure the screws.
  • Place the heater on a stable, horizontal surface before connecting to power.

Operation

The heater is equipped with a double power switch and a thermostat knob:

Control panel diagram
Control panel diagram
  • Power Settings: Switch 'I' provides 800W, switch 'II' provides 1200W. Using both switches provides a maximum power of 2000W.
  • Thermostat: Turn the knob clockwise to increase the temperature. Once the desired room temperature is reached, turn it slowly counter-clockwise until you hear a 'click'. The heater will then automatically maintain this temperature.
  • Turbo Function: Use the separate 'Fan switch' to activate the turbo function for faster room heating.
  • Anti-frost Function: To maintain a minimum temperature (e.g., in cellars or attics), set the thermostat to the anti-frost position (indicated by a small circle). The heater will maintain a temperature of 5±2°C.

Cleaning and maintenance

  • Always switch off and unplug the appliance before cleaning.
  • Wait for the heater to cool down completely.
  • Clean the body with a damp cloth, vacuum cleaner, or soft brush.
  • Never immerse the appliance in water.
  • Do not use petrol, thinners, or abrasive cleaners.

Storage

  • Allow the heater to cool down before storing.
  • Use the original packaging to protect the heater from dust and dirt.
  • Store in a dry place away from direct sunlight.
  • Do not store in wet or damp premises.

Technical specifications

  • Model: CN204ZF
  • Rated Power: 2000W
  • Rated Voltage: 230V~
  • Rated Frequency: 50Hz

Manufacturer information

TESY

Brand profile

Practical help

Common problems

Heater emits smoke or odor during first use

This is normal and will disappear shortly after the heater begins operating.

Desired room temperature not reached

Ensure the room size is appropriate for the heater's power; consider using an additional heater if necessary.

Before use

  • Check if the voltage matches your home supply
  • Ensure feet are properly installed with screws
  • Place on a stable, horizontal surface
  • Keep 1m distance from flammable objects
  • Ensure the power socket is easily accessible

Specs in practice

Power levels
I=800W, II=1200W, I+II=2000W

Images and diagrams

  • Feet installation: Attach feet to the base using one screw each.
  • Control panel: Includes power switches, fan switch, and thermostat knob.

Model compatibility

  • Only for well-insulated spaces or occasional use.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.