Installation Guide for The Home Depot 21045-W3BK Light Fixture

Important Information

This document provides assembly and installation instructions for the 21045-W3BK light fixture. If you encounter any issues or have questions, you can contact the support team via email at [email protected].

Parts Included

Before beginning installation, ensure all parts are present:

• Junction box (0)
• Wire nuts (3)
• Mounting bracket (1)
• Studs (2)
• Leading wires (2)
• Wires (2)
• Screws (2)
• Canopy (1)
• Color temperature switch (1)
• Glass shades (inner) (3)
• Glass shades (outer) (3)
• Lamp cups (3)

Assembly and Installation

Follow these steps to assemble the fixture:

1. Attach the mounting bracket (C) and studs (D) to the junction box (A).
2. Connect the leading wires (E) and wires (F) using the wire nuts (B).
3. Secure the canopy (J) to the mounting bracket (C) using the screws (G).
4. Attach the glass shades (inner K and outer L) to the lamp cups (M).

Wiring Connection

The fixture requires connection to the electrical circuit. Ensure wires meet safety standards. A wiring diagram is provided in the manual showing the connection of the L (Live) and N (Neutral) wires.

Safety Precautions

• Electrical Safety: Always turn off the electricity at the main circuit breaker before beginning installation.
• Special Controls: If using special control devices with this fixture, follow their instructions carefully to ensure full compliance with N.E.C. requirements.
• California Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth and wash hands after handling.
• Fragile Components: All glass is fragile. Use care when handling glass components and/or lamps.