Thomann Pageturn Pedal

Quick guide from the manual

The Thomann Pageturn Pedal is a wireless Bluetooth controller designed for turning digital media pages on mobile devices, computers, and tablets. To start using the device, hold the Mode button for 3 seconds to power it on. Pair it with your device using the Bluetooth ID 'Thomann Pageturn'. The device features an automatic standby mode after 20 minutes of inactivity, which can be disabled by pressing both pedals simultaneously.

Safety instructions

Lithium battery handling: Store in a cool, dry place. Do not open or damage the battery. If damaged, collect electrolyte with absorbent paper while wearing rubber gloves. Recharge every three months if stored for long periods.

Ambient conditions: Operate only indoors. Avoid direct sunlight, heavy pollution, strong vibrations, and extreme temperature fluctuations. Do not expose to liquids or moisture.

Power supply: Use only the specified power supply or an equivalent with identical voltage and polarity to avoid damage.

Features

• Bluetooth controller with two foot switches
• Wireless paging for sheet music, e-books, and presentations
• Compatible with Mac, PC, iPad, and Android tablets with Bluetooth Smart Ready
• Range: up to 10 meters
• Built-in rechargeable lithium battery with automatic shut-off

Connections and controls

The device consists of the following components:

• USB port: Used for charging the device and status display.
• Left pedal: Primary control for page turning or mode-specific functions.
• Right pedal: Primary control for page turning or mode-specific functions.
• Mode button: Used for selecting operating modes.
• Status LEDs: Indicate the current mode and connection status.

Operation

Switching on/off: Hold the Mode button for 3 seconds.

Bluetooth connection: Locate 'Thomann Pageturn' in your device's Bluetooth settings. The status LED will flash during connection and remain lit once established.

Controlling modes: Press the Mode button to switch between modes. Press the Mode button twice in a row to switch to the previous mode. The status LED indicates the currently selected mode.

Standby mode: If unused for 20 minutes, the device enters standby. Press both pedals at the same time to wake the device.

Charging the device

Connect the device to a power source using a USB-C cable (not included). The charging time is approximately 1 hour.

Technical specifications

• Input: USB-C socket
• Operating voltage: 5 V / min. 50 mA
• Battery: Lithium-ion, 5 V, 280 mAh
• Operating time: 35 hours
• Dimensions: 190 mm x 35 mm x 120 mm
• Weight: 0.25 kg
• Ambient conditions: 0 °C to 40 °C, 20% to 80% relative humidity

Disposal

Do not dispose of the device or batteries with household waste. Use designated collection sites for electronic waste and hazardous materials. If the device contains personal data, delete it before disposal.