Electronics / Speakers Soundbars
Trevi XF 3600 PRO Party Speaker User Guide
Comprehensive user guide for the Trevi XF 3600 PRO high-power portable party speaker, covering setup, wireless connection, TWS pairing, recording, and maintenance.
Table of contents
Product Overview
The Trevi XF 3600 PRO is a high-power portable party speaker designed for home use. It features wireless connectivity, a built-in USB/Micro SD player, disco light effects, and TWS (True Wireless Stereo) technology, allowing you to pair two speakers for a wider stereo soundstage. The unit includes inputs for two wired microphones and a guitar, making it versatile for karaoke and live performances.
Getting Started
Before using the speaker, ensure it is fully charged. To charge, turn the power switch to the OFF position and connect the power cable to the AC outlet. The battery icon segments on the display will flash during charging and become solid when fully charged. It is recommended to disconnect the power cable after a maximum of 15 hours of charging to preserve battery life.
Operation and Connectivity
To power on the device, set the main power switch to the ON position. You can select between different modes such as Wireless (Bluetooth), USB/SD, or AUX-IN using the Mode button. For wireless playback, select the Wireless function, search for 'XF 3600 PRO' on your external device, and pair it. If prompted, use the password '0000'.
The TWS function allows you to link two identical speakers wirelessly. To establish this, turn on both speakers, select Wireless mode on both, and hold the Play/Pause button on the main unit until 'Slau' flashes on the display. Once paired, the speakers will act as a single stereo system.
Microphone and Recording
The speaker comes with a wireless microphone. Insert two AA batteries, turn it on, and adjust the volume using the MIC VOL knob. You can record your voice directly onto a USB or SD memory card. When the recording function is active, the device automatically creates a 'Record' folder. Note that some controls may be inhibited during the recording process.
Care and Maintenance
Clean the speaker with a soft, slightly damp cloth. Avoid using solvents or abrasive substances. For long periods of inactivity, ensure the battery is recharged at least once a month to maintain its health. If the device requires service, always contact an authorized Trevi service center.
Manufacturer information
TREVI S.p.A.
Practical help
Common problems
No sound when powered on
Check if an input source is connected, ensure volume is not at 0, and verify that the voice guide is active or a USB/SD card is inserted.
Distorted sound
Lower the master volume or check the audio file for errors.
No sound from microphone
Ensure the microphone is correctly plugged in, switched on, and the microphone volume is adjusted.
Battery not charging or short life
Verify the power cable is connected properly, allow 6-8 hours for a full charge, or replace the battery if it has reached the end of its life cycle.
Loud noises from speakers
Keep the microphone at least 2 meters away from the speaker and ensure mobile phones are kept away during use.
Before use
- Ensure the battery is fully charged before first use.
- Check that all cables are properly installed.
- Verify the power source matches the device specifications.
- Ensure the speaker is placed on a stable surface with at least 5cm of space for ventilation.
- Insert fresh batteries into the remote control and wireless microphone.
- Keep the speaker away from strong heat sources and humid environments.
Specs in practice
- Max Audio Power
- 200W peak output power.
- FM Frequency Band
- 87.5MHz - 108MHz for radio reception.
- Frequency Response
- 40Hz - 20KHz, covering the full audible range.
- Wireless Microphone Frequency
- 668.5MHz, specific to the included wireless mic.
Images and diagrams
- The top panel contains volume, echo, bass, and treble controls.
- The rear panel houses the power switch, USB/SD slots, and auxiliary inputs.
- The remote control provides direct access to track selection, EQ modes, and TWS pairing.
- The battery compartment diagram shows correct polarity for AAA batteries.
- The UK plug wiring diagram illustrates proper connection for the three-pin plug.
Model compatibility
- TWS function only works between speakers of the same model.
- USB/SD cards must be formatted in FAT16 or FAT32.
- Wireless microphone range is approximately 15 meters without obstacles.
- The product has usage restrictions in several European countries; check local regulations.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.