User Manual for Vevor 11063BX-A Handheld Pool Vacuum

Quick guide from the manual

This document provides instructions for the Vevor 11063BX-A and 11063BX-B handheld pool vacuum cleaners. The device is designed to be powered by water pressure from a garden hose to clean debris from pools. Proper assembly and adherence to safety precautions are essential for safe and effective operation.

Safety Instructions

Follow these precautions to ensure safe operation and prevent hazards:

• Assembly: Assemble only according to the provided instructions. Keep the assembly area clean and well-lit.
• Personal Protection: Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
• Restrictions: Do not assemble the unit when tired or under the influence of alcohol, drugs, or medication. Keep bystanders away during assembly.
• Usage: Do not sit or stand on the item. This product is not a toy; do not allow children to play with or near it.
• Maintenance: Inspect the unit before every use. Do not use if assembly is improper. Store the vacuum out of direct sunlight to ensure a longer product life.

Installation Instructions

Follow these steps to assemble your pool vacuum:

1. Assemble Handle: Connect the six aluminum tubes to form the handle.
2. Attach Handle: Insert the assembled handle into the connector block and screw it to tighten.
3. Attach Bag: Secure the draw-string bag to the vacuum head.
4. Attach Hose: Connect your garden hose to the quick-release fitting on the end piece of the vacuum cleaner.
5. Optional Telepole: If using a telepole (not included), remove the handle connector by removing the pin, then attach the plastic handle using the pin in the same location.

Recommended Use Method

The most effective method for vacuuming a pool is to use slow, easy strokes back and forth over the entire area. The water pressure from the hose powers the suction, pulling debris and leaves into the storage bag while allowing clean water to pass back into the pool.