User Manual for Vevor 200W Photovoltaic Module

Quick guide from the manual

This manual provides instructions for the Vevor 200W Photovoltaic Module. The product is intended for use in solar power generation systems to convert light energy into electrical energy. Ensure the installation site is well-lit and unobstructed, and that the support structure is stable before beginning installation.

Product Overview

The module features high photoelectric conversion efficiency, high-transparency tempered glass for impact resistance, and a sealed, waterproof design suitable for harsh weather conditions.

Technical Parameters

• Peak power (Pmax): 200W
• Open-circuit voltage (Voc): 39.5V (36-46V)
• Short-circuit current (Isc): 6.62A (5.7-6.7A)
• Operating voltage (Vmpp): 32.91V (30-40V)
• Working current (Impp): 6.32A (5.4-6.4A)
• Protection grade: IP67 (Dust-proof and water-proof)
• Working temperature: -10°C to +65°C

Installation Guide

Preparations: Ensure the installation location is unobstructed and well-lit. Verify that the support structure is stable and meets load-bearing requirements. Prepare necessary tools such as bolts and connectors.

Steps:

1. Fix the components on the bracket and ensure screws are tightened.
2. Connect the components to the inverter or junction box according to the electrical connection diagram.
3. Check the insulation of the circuit and the reliability of the connection.

Safety and Precautions

• Avoid scratches or impacts on the surface of the components during installation.
• Installation operations are prohibited during thunderstorms.
• Ensure positive and negative poles are connected correctly to prevent short circuits.

Disposal

This product is subject to European Directive 2012/19/EC. It requires separate refuse collection and must be taken to a collection point for recycling electrical and electronic devices.