User Manual for Vevor 100W Solar Panel

Quick guide from the manual

This manual provides essential information for the Vevor 100W Photovoltaic Module. It is intended for use in off-grid solar power generation systems to convert light energy into electrical energy for households, industries, or power stations.

Product Overview

The 100W solar panel features high photoelectric conversion efficiency and is built with high-transparency, impact-resistant tempered glass. Its sealed and waterproof design makes it suitable for harsh weather conditions.

Technical Parameters

• Peak Power (Pmax): 100W
• Open-circuit voltage (Voc): 44.09V (40-50V)
• Short-circuit current (Isc): 3.08A (2.8-3.5A)
• Operating voltage (Vmpp): 36.57V (32-42V)
• Working current (Impp): 2.92A (2.5-3.2A)
• Protection grade: IP67 (Dust-proof and water-proof)
• Operating temperature: -10°C to 65°C

Installation Guide

Preparations:

• Ensure the installation location is unobstructed and well-lit.
• Verify that the support structure is stable and meets load-bearing requirements.
• Prepare necessary tools and accessories (bolts, connectors, etc.).

Installation Steps:

1. Fix the components on the bracket and ensure screws are tightened.
2. Connect the components to the inverter or junction box according to the electrical connection diagram.
3. Check the insulation of the circuit and the reliability of the connection.

Precautions:

• Avoid scratches or impacts on the surface of the components during installation.
• Installation operations are prohibited during thunderstorms.
• Ensure positive and negative poles are connected correctly to prevent short circuits.

Disposal

This product is subject to European Directive 2012/19/EC. Do not discard with normal domestic waste; take it to a collection point for recycling electrical and electronic devices.