User Manual for VEVOR 100W Solar Panel

Quick Guide

This document provides essential information for the VEVOR 100W Photovoltaic Module. Before installation, ensure the location is unobstructed and well-lit. Installation must not be performed during thunderstorms. Always ensure correct polarity (positive and negative) when connecting to an inverter or junction box to prevent short circuits.

Product Overview

The VEVOR 100W solar panel is designed for solar photovoltaic power generation systems, converting light energy into electrical energy for households, industries, or power stations. Key features include:

• High photoelectric conversion efficiency.
• Impact-resistant and anti-aging high-transparency tempered glass.
• Sealed and waterproof design suitable for harsh weather conditions.
• Long life cycle with low maintenance costs.

Technical Parameters

The following specifications are based on Standard Test Conditions (STC):

• Peak power (Pmax): 100W
• Open-circuit voltage (Voc): 22.04V (20-30V)
• Short-circuit current (Isc): 5.8A (4.5-6.5A)
• Operating voltage (Vmpp): 18.28V (18-28V)
• Working current (Impp): 5.84A (4.5-6A)
• Battery cell type: Single crystal silicon
• Protection grade: IP67 (Dust-proof and water-proof)
• Operating temperature: -10 to 65°C
• Storage temperature: -40 to +85°C

Installation Guide

Follow these steps to install the solar panel:

1. Preparation: Confirm the installation location is unobstructed and well-lit. Verify that the support structure is stable and meets load-bearing requirements. Prepare necessary tools and accessories (bolts, connectors, etc.).
2. Mounting: Fix the components onto the bracket and ensure all screws are tightened.
3. Connection: Connect the components to the inverter or junction box according to the electrical connection diagram.
4. Verification: Check the insulation of the circuit and the reliability of the connection.

Safety and Disposal

Precautions: Avoid scratches or impacts on the surface of the components during installation. Do not perform installation operations during thunderstorms. Ensure positive and negative poles are connected correctly to prevent short circuits.

Disposal: This product is subject to European Directive 2012/19/EC. The crossed-out wheelie bin symbol indicates that the product requires separate collection in the European Union. Do not discard with normal domestic waste; take it to a designated collection point for recycling electrical and electronic devices.