Installation and Safety Guide for Viessmann Vitotrol 100-E Remote Control

Quick guide from the manual

The Vitotrol 100-E is a wireless remote control designed for heating system users. This guide covers essential safety, installation, and operational requirements. Always refer to the full documentation for detailed system configuration.

Safety Instructions

Target Group: These instructions are intended for heating system users. The device can be operated by children aged 8 and older, as well as individuals with reduced physical, sensory, or mental faculties, provided they are supervised or instructed in safe use.

• Damaged Equipment: Never start up a damaged appliance. Repair work is not permitted; consult your contractor.
• Medical Devices: Wireless signals can interfere with medical devices such as pacemakers. Consult the manufacturer of your medical device if you have concerns.

Installation and Operation

Conditions for Safe Operation:

• The appliance must only be installed indoors.
• The appliance must not come into contact with water.
• Observe the operating instructions for your specific heating system.

Setup:

• Batteries: The device requires 2x AA 1.5V batteries.
• Mounting: Ensure the device is mounted at an appropriate height (recommended 1.5m) for optimal operation.
• Connectivity: The device uses wireless signals (2405-2480 MHz) to connect to the central unit. Use the ViGuide app for setup and pairing.

Compliance and Disposal

FCC/IC Compliance: This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standards. Operation is subject to the condition that the device does not cause harmful interference and must accept any received interference. Maintain a minimum distance of 20 cm between the radiator and your body during operation.

Disposal: Dispose of the appliance as electrical waste. Do not dispose of it with domestic household waste.