Lighting / Fixtures
Acroma 16-Light Chandelier Installation Guide
Installation guide for the Acroma 16-Light Chandelier. Includes safety warnings, hardware list, and step-by-step assembly instructions for mounting and wiring.
Quick answers from the manual
Quick answer
- This document is an installation guide for the Acroma 16-Light Chandelier. It covers safety precautions, a list of included hardware, and step-by-step instructions for mounting and wiring the fixture. p. 1, 2, 3
Key actions
- Turn off power supply p. 1
- Attach mounting plate p. 2
- Connect wires p. 2, 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Type | 16 x Max 60W Medium Base | Maximum wattage and base type for the 16 light sockets. | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Safety and Warranty p. 1
- Hardware and Assembly Overview p. 2
- Installation Steps p. 3
Table of contents
Quick guide from the manual
Before beginning installation, ensure the power is disconnected at the circuit breaker or fuse box. Use a voltage tester to confirm the circuit is not live. Always use tools with insulated handles and wear safety goggles. If you have any electrical questions, consult a qualified electrician.
Safety Information
Read and save these instructions. Failure to follow safety guidelines can lead to electrical shock, fire, or other injuries. When replacing fuses, ensure hands and feet are dry and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Use a safety cover over any unused outlets to protect children.
Hardware Included
The package includes the following components:
- Mounting plate
- Support screws (x2)
- Outlet box screws (x2)
- Hex nuts (x2)
- Green ground screw
- Wire connectors (x3)
- Canopy
- Chain end loops (x10)
- Flat washers (x2)
- Finials (x2)
- Chain
- Glass shades (x16)
- Connector ring
Assembly and Installation
Assembly is accomplished by following these steps:
- Determine Length: Decide on the required length of the stem or chain.
- Mounting: Attach the mounting plate to the junction box.
- Wiring: Make all necessary electrical connections. Connect the lanyard to the mounting bracket to help hold the fixture in place while making wire connections.
- Final Assembly: Hang the fixture from the ceiling and install the glass shades.
Practical help
Common problems
Electrical shock risk
Always disconnect power at the circuit breaker or fuse box before starting installation.
Unsure about wiring
Consult a qualified electrician if you have any electrical questions or if new wiring is required.
Before use
- Turn off the main power supply at the circuit breaker or fuse box.
- Use a voltage tester to ensure the wires are not live.
- Place the product on a soft, non-abrasive surface (e.g., carpet or cardboard) to avoid damage.
- Ensure you have all required tools: Phillips screwdriver, wire stripper, pliers, safety goggles, and electrical tape.
- Use tools with insulated handles.
Show more Show less
Images and diagrams
- The manual provides a visual guide for hardware identification, showing the mounting plate, screws, connectors, and glass shades.
- Step-by-step diagrams illustrate the connection of side hanging rods to the wheel and wiring chamber.
- Diagrams show the proper use of the lanyard to support the fixture during wiring.
Model compatibility
- Designed for standard junction boxes.
- Requires a qualified electrician for new wiring installations.
Manual page author
Michael Turner
Technical manual editor