Power / Batteries Chargers
User Manual for ALLPOWERS 18V 100W Foldable Solar Panel (AP-SP-012)
Quick guide for the ALLPOWERS 18V 100W Foldable Solar Panel (AP-SP-012). Learn how to set up, connect devices, and safely operate your solar charger for optimal performance.
Table of contents
Quick guide from the manual
The ALLPOWERS 18V 100W Foldable Solar Panel is designed for portable power generation. To achieve maximum efficiency, place the panel in direct sunlight, ideally between 9:00 AM and 5:00 PM. Ensure the panel is not obstructed by shadows, as this significantly reduces power output.
How to use
To charge your devices, follow these steps:
- Unfold the solar panel and place it in direct sunlight.
- Connect your device to the solar panel using the appropriate cable (USB or DC).
- The LED indicator will light up when the panel is charging.
- If charging a laptop, ensure the correct voltage is selected and the laptop is compatible with the provided DC connectors.
Charging car batteries
The panel can be used to maintain car batteries. Use the provided alligator clips to connect the panel to the battery terminals. Ensure the car engine is turned off before connecting. Connect the red clip to the positive (+) terminal and the black clip to the negative (-) terminal.
Safety precautions
- Do not place sharp objects on the surface of the solar panel.
- Avoid using the panel in rainy weather; it is not waterproof.
- Do not leave the panel in a hot car, as high temperatures can damage the unit.
- Keep the panel at least 20-30cm away from the car battery when charging to prevent overheating.
- If your device indicates a charging error, unplug and reconnect the cable.
Technical specifications
- Peak power: 100W
- Output: Dual USB (5V/2.4A) and DC (18V/5A)
- Conversion efficiency: 22%-25%
- Folded size: 32x19x8cm
- Unfolded size: 94x94x1cm
- Weight: 2.15kg
Support
For any issues or warranty claims, contact [email protected] or visit the official website at allpowers.com.
Official resources from the manual
Manufacturer information
ALLPOWERS
Practical help
Common problems
Device not charging
Check if the LED indicator is on. Ensure the panel is in direct sunlight and not obstructed by shadows. Reconnect the cable to the device.
Laptop not charging
Verify that the correct DC connector is used and that the laptop is compatible with the 18V output. Ensure the laptop is not drawing more than 3A current.
Before use
- Ensure the weather is sunny and clear.
- Check that the solar panel surface is clean and free of sharp objects.
- Verify that you have the correct cable for your device (USB or DC).
- Confirm the device is compatible with 18V DC or 5V USB output.
Specs in practice
- 100W Peak Power
- The maximum power output under ideal sunlight conditions.
- 22%-25% Efficiency
- The percentage of sunlight converted into usable electricity.
- 18V DC Output
- Primary output for charging laptops and 12V car batteries.
Model compatibility
- Compatible with most 12V car batteries.
- Compatible with laptops requiring 18V input.
- USB ports compatible with smartphones, tablets, and other 5V devices.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.