Anker 547 Charger (120W) A2144 User Guide

Quick guide from the manual

For the fastest and safest charging experience, always use an Anker cable, your device's original cable, or another certified cable such as MFi. This device is designed for IT equipment only.

Safety instructions

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use must not exceed 25°C.
• Do not place naked flame sources, such as candles, on the product.
• The socket-outlet must be installed near the equipment and be easily accessible.
• If the product is damaged or the plug is broken, dispose of the product; it is not intended to be repaired by service personnel.
• Clean only with a dry cloth or brush.

Using your product

The charger features 4 USB-C ports. Connect your devices to the ports to begin charging. The power output varies depending on how many devices are connected simultaneously.

Power distribution

The total output is 120W. The power distribution changes based on the number of ports in use:

• Single Port: USB-C1 (100W Max), USB-C2 (60W Max), USB-C3/C4 (20W Max).
• Two Ports: Various combinations (e.g., USB-C1+C2 = 60W+60W).
• Three Ports: Various combinations (e.g., 60W+30W+20W).
• Four Ports: 50W+30W+20W+20W.

Technical specifications

Input: 100-240V~ 4A 50-60Hz

Output: Refer to the detailed output table in the manual for specific port combinations.

Customer service

For FAQs and more information, visit anker.com/support. You can also contact support via email at [email protected] or [email protected] (for Middle East and Africa).