User Manual for Anko 10000mAh Power Bank
Quick guide for the Anko 10000mAh Power Bank (BP746). Learn how to charge your devices, recharge the power bank, and follow safety guidelines.
Table of contents
Quick Guide
This power bank is designed to charge mobile phones, tablets, and other devices. It features a 10000mAh capacity and a total output of 20W. To maintain battery health, ensure you recharge the unit at least once every 3 months. Do not charge the power bank and your device simultaneously.
Device Overview
The power bank includes the following ports and controls:

- Power Button: Used to activate the power bank.
- USB-A Output: Standard port for charging mobile phones and tablets.
- USB-C1 Input/Output: Dual-purpose port used for charging the power bank itself or charging your devices.
- USB-C2 Output: Dedicated output port for charging devices.
Charging Instructions
Charging your devices:
- Connect your device to the USB-A, USB-C1, or USB-C2 port using a compatible charging cable.
- Note: You may need to purchase a separate Type-C cable for devices requiring USB-C input.
Charging the power bank:
- Use the USB-C1 port to connect the power bank to a power adapter (not included).
- The power bank will charge via this port.
Safety Information
- Keep the product away from water, liquids, and wet areas.
- Do not expose the product to fire or temperatures exceeding 45°C.
- Do not drop, puncture, or apply excessive force to the product.
- If the product swells, bulges, or is damaged, discontinue use immediately.
- Do not attempt to disassemble or repair the unit.
- For long-term storage (over 3 months), charge the device to between 50% and 75% capacity.
Technical Specifications
- Battery Capacity: 10000mAh (37Wh)
- Battery Type: Lithium polymer
- Total Output: 20W
- Charging Time: Approximately 3.5 hours
- Input (USB-C1): 5V 3A, 9V 2A
- Output (USB-A): 5V 3A, 9V 2A, 12V 1.5A
- Output (USB-C1): 5V 3A, 9V 2.22A, 12V 1.67A
- Output (USB-C2): 5V 3A, 9V 2A, 12V 1.5A
Warranty
This product comes with a 12-month warranty covering defects in materials and workmanship. Please retain your receipt as proof of purchase. For warranty claims or assistance, contact the customer service center for the retailer where you purchased the product (Kmart or Target).
Manufacturer information
Anko
Practical help
Common problems
Ensure the cable is securely connected to both the power bank and your device. Check if the power bank has sufficient charge.
Ensure you are using the USB-C1 port for input and that your power adapter is functioning correctly.
Before use
- Inspect the power bank for any physical damage.
- Ensure you have a compatible charging cable for your device.
- Charge the power bank fully before the first use.
Specs in practice
- 10000mAh Capacity
- The total energy storage capacity of the battery.
- 20W Total Output
- The maximum power delivery capability for fast charging.
- 3.5 Hours Charging Time
- The estimated time required to fully recharge the power bank from empty.
Images and diagrams
- USB-A port is for output only.
- USB-C1 port supports both input (charging the bank) and output (charging devices).
- USB-C2 port is for output only.
Model compatibility
- Requires a separate USB-C cable for charging devices via USB-C ports.
- Power adapter for charging the power bank is not included.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.