Power / Wireless Chargers
Anko Smart LED Strip Light 10M
Quick guide for the Anko 10M Smart Wi-Fi LED Strip Light. Learn how to install, connect to the Tuya Smart app, use the remote, and set up voice control.
Table of contents
Quick guide from the manual
This guide covers the setup and operation of the Anko Smart LED Strip Light (Model 43033010). Ensure your Wi-Fi network is 2.4GHz, as 5GHz networks are not supported. Download the Tuya Smart app to control the device via smartphone or integrate with voice assistants like Amazon Alexa and Google Assistant.
Installation
Follow these steps to install the LED strip:
- Clean the surface where the strip will be applied to ensure proper adhesion.
- Connect the LED strip to the controller box.
- Connect the power adapter to the controller box and plug it into a wall outlet.
- Ensure all connections are secure before powering on.
App Setup
To connect the device to your home network:
- Download and install the Tuya Smart app from the App Store or Google Play.
- Register an account or log in.
- Power on the LED strip. If the light is not flashing, press and hold the button on the controller for 5 seconds to enter pairing mode.
- In the app, tap the plus (+) icon to add a device.
- Select the lighting category and follow the on-screen instructions to connect to your 2.4GHz Wi-Fi network.
Voice Control
The device supports voice control via Amazon Alexa and Google Assistant. Ensure the device is successfully added to the Tuya Smart app, then link your Tuya account within the Alexa or Google Home app to enable voice commands.
Remote Control
The included remote control allows for manual operation without the app. Use the buttons to:
- Turn the light on or off.
- Adjust brightness levels.
- Change colors and select preset lighting modes.
Specifications
- Input: 100-240V~ 50/60Hz
- Output: 12V 2A
- Connectivity: Wi-Fi 2.4GHz
Safety
This product contains a button cell battery. Keep batteries out of reach of children. If swallowed, seek medical attention immediately. Do not expose the device to water or extreme temperatures.
Manufacturer information
Anko
Practical help
Common problems
Device fails to connect to Wi-Fi
Ensure your phone is connected to a 2.4GHz Wi-Fi network. 5GHz networks are not supported.
Light not entering pairing mode
Press and hold the button on the controller for 5 seconds until the light flashes.
Before use
- Clean the mounting surface thoroughly.
- Ensure a 2.4GHz Wi-Fi network is available.
- Download the Tuya Smart app.
- Check that the power outlet is compatible with the 100-240V input.
Specs in practice
- Input Voltage
- 100-240V~ 50/60Hz, suitable for standard household power outlets.
- Output Voltage
- 12V 2A, required for the LED strip operation.
Images and diagrams
- The installation diagram shows the connection sequence: LED Strip to Controller to Power Adapter.
- The remote control diagram identifies buttons for color selection, brightness adjustment, and power control.
Model compatibility
- Compatible with Amazon Alexa.
- Compatible with Google Assistant.
- Requires 2.4GHz Wi-Fi network.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.