User Manual for ATD Tools 80211 Rechargeable Flood Light with Speaker

Quick guide from the manual

This document provides essential operating instructions for the ATD Tools 80211 rechargeable flood light. Key operations include charging the device using the provided 5V 3.5A charger and pairing the built-in Bluetooth speaker. Always ensure the device is fully charged before first use and follow the battery maintenance schedule to prolong its lifespan.

Product Description

The ATD Tools 80211 is a versatile work light featuring a 5W speaker and a stepless dimming function. It is designed with a 360-degree rotatable bracket and a strong magnetic base for flexible positioning. The device includes a digital display for battery status and lumen output.

Specifications

• Charging Voltage/Current: 5V 3.5A
• Battery: 3.7V 4400mAh Li-ion
• Charging Time: Approximately 1.5 hours
• Brightness: 100 to 1000 lumens (stepless dimming)
• Runtime: Approximately 3 hours (highest level) to 20 hours (lowest level)
• Color Temperature: 5300-6700K
• CRI: ≥70

Battery Treatment and Charging

Proper battery care is critical for the longevity of the device:

• Charge the lamp fully before the first use.
• Use only the charger equipped with the lamp.
• Do not leave the lamp charging for more than 24 hours.
• Avoid leaving the battery in a fully discharged condition.
• Recharge the work light at least once every six months if not in regular use.

Speaker Connectivity

To use the built-in Bluetooth speaker:

1. Press the setting button to switch on the speaker; you will hear a tone.
2. Scan for available devices on your phone or computer.
3. Select "BT Speaker" from the list of available devices.
4. Wait to hear the confirmation tone.
5. To disconnect, press the setting button to switch off the speaker.
6. Paired devices will automatically reconnect once the speaker is turned on.

Safety Warnings

• Read all instructions before using the appliance.
• Wear safety goggles (both the user and bystanders).
• Avoid looking directly into the light beam.
• Keep the device away from children and open flames.
• Do not dismantle, open, or shred secondary cells or batteries.
• Do not cover the lens during operation to prevent overheating.
• Do not contaminate the lens with organic solvents.
• Do not knock or extrude the device.