findmanualpdf.com

Sealey LED15WFL 10W SMD LED 3-in-1 Folding Floodlight User Guide

Quick guide for the Sealey LED15WFL 10W SMD LED 3-in-1 Folding Floodlight. Learn how to charge, operate the three light modes, use magnetic mounts, and maintain the battery for optimal performance.

Table of contents

Manual images

Click an image to enlarge

Quick guide from the manual

The Sealey LED15WFL is a versatile 3-in-1 folding floodlight designed for various workplace situations. It features a rechargeable 3.7V Li-ion battery, magnetic feet, and hooks for hands-free operation. Before first use, ensure the unit is fully charged. Use only the supplied USB cable for charging. The light offers three working modes and can be adjusted using the ratchet joints in the frame.

Safety Instructions

  • Electrical Safety: Use only the supplied USB cable. Ensure the floodlight is unplugged before cleaning.
  • Battery Safety: Do not attempt to open, disassemble, or modify the battery. Do not expose to temperatures above 60°C (140°F). Do not crush, puncture, or dispose of in fire or water.
  • General Safety: Do not shine the light directly into eyes. Do not allow children to use the floodlight. Do not immerse in water. Do not cover or block the lens during use.

Charging the Floodlight

Charging indicator light
Charging indicator light
  1. Ensure the floodlight is turned off before charging.
  2. Connect the USB cable to the charging point on the main body.
  3. The LED display indicates charging status: Red light means charging, Green light means fully charged.
  4. Once fully charged, unplug the charger cable from the power supply.

Operating the Floodlight

The floodlight features three working modes selected via the Mode Selector switch on the main body. The modes include illuminating both sides or either the front or back light independently. You can adjust the angle of the light using the ratchet effect built into the frame joints. For hands-free use, utilize the magnetic feet or the sprung hook located at the ends of the unit.

Mode selector switch and USB charging point
Mode selector switch and USB charging point
Using the sprung hook
Using the sprung hook
Corner light usage
Corner light usage
Magnetic feet usage
Magnetic feet usage

Maintenance and Storage

  • Wipe down dirty surfaces with a damp cloth. Do not use abrasive or caustic cleaning materials.
  • Do not fully discharge the batteries before recharging.
  • Do not leave batteries in a discharged state; recharge immediately.
  • If the floodlight is not in use, recharge the batteries every three months.
  • Store the charger in a safe, dry, childproof location.

Technical Specifications

  • Model No: LED15WFL
  • Battery: 3.7V Li-ion 4000mAh
  • Charging Time: 5-6 hours
  • Operating Time: 2 hours (both sides), 4 hours (one side)
  • Lumen Output: 1000lm
  • Colour Temperature: 6000K
  • IP Rating: IP20
  • Power: 10W

Manufacturer information

Sealey Group

Brand profile

Practical help

Common problems

Battery capacity diminishing

Ensure the battery is properly charged before first use and regularly conditioned. Do not leave batteries in a discharged state.

Light not charging

Ensure the floodlight is turned off before attempting to charge. Check that the USB cable is connected properly.

Battery maintenance

If the floodlight is not in use, recharge the batteries every three months to prevent capacity loss.

Before use

  • Ensure the floodlight is fully charged before initial use.
  • Inspect the USB cable and connector for wear or damage.
  • Ensure the floodlight is turned off before connecting to power.
  • Verify the environment is safe (not near water, not in extreme heat).

Specs in practice

Charging time
5-6 hours required for a full charge.
Operating time
2 hours with both sides lit, 4 hours with one side lit.
Colour Temperature
6000K provides a cool white light.

Images and diagrams

  • Fig 1: Shows the On/Off mode selector switch and USB charging point.
  • Fig 2: Shows the charging indicator light (Red = Charging, Green = Fully Charged).
  • Fig 3: Shows the hook for hanging the light.
  • Fig 4 & 5: Shows the magnetic feet and folding positions for various mounting scenarios.

Model compatibility

  • Use only the supplied USB cable for charging.
  • Not suitable for use in wet conditions (IP20 rating).

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.