Automotive / Car Audio
User Guide for AudioControl PNW-65 Coaxial Speakers
Quick guide for the AudioControl PNW-65 high-fidelity coaxial speakers. Includes installation instructions, wiring diagrams, technical specifications, and warranty information.
Table of contents
Manual images
Click an image to enlargeQuick Guide
The AudioControl PNW-65 is a high-fidelity coaxial speaker system. Before installation, ensure you have 14-18 gauge speaker wire. The system requires a flat mounting surface and sufficient depth. Always verify that the speaker does not obstruct window or door lock mechanisms before cutting or mounting.
Installation
Factory Location Installation: Remove the factory grille or panel to access the existing speaker. Disconnect the wiring, remove the factory speaker, and mount the new PNW-65 using the existing hardware.
Custom Location Installation: Determine the mounting location and ensure the surface is flat. Check the mounting depth (2.36 in / 60 mm). Use the provided cut-out template to mark the hole, then cut the opening. Place the speaker into the hole and secure it using the supplied mounting hardware.
Wiring
Proper wiring is essential for sound quality and speaker protection. Use the following terminal identification:
- Large speaker terminal: Positive (+)
- Small speaker terminal: Negative (-)
Specifications
Key technical parameters for the PNW-65:
- Continuous Power Handling (RMS): 50W (Min), 75W (Ideal), 100W (Max)
- System Frequency Response: 60-20K Hz
- Crossover Type: Butterworth
- XO Frequency: 5250 Hz
- Slope: -6 dB per octave
- DC Resistance (Re): 2.3 ohms
Dimensions
- Overall Diameter (w/o Grille): 6.5 in / 166 mm
- Cut Out Diameter: 5.59 in / 142 mm
- Mounting Depth: 2.36 in / 60 mm
- Grille Overall Diameter: 7.05 in / 179 mm
Warranty and Support
AudioControl offers a one-year warranty on speaker products, which can be extended to two years if installed by an authorized dealer. You must register your purchase within 15 days at www.audiocontrol.com/product-registration. For technical questions, visit www.audiocontrol.com/knowledge-base/ or contact AudioControl, Inc. at 425-775-8461 or [email protected].
Official resources from the manual
Practical help
Common problems
Speaker hits obstructions in door
Roll windows up/down and lock/unlock the doors to ensure there is no interference before final mounting.
Improper sound quality or phase issues
Ensure correct wiring polarity (Large terminal is positive +, Small terminal is negative -).
Warranty void
Do not allow unauthorized personnel to service the unit, do not alter the serial number, and ensure installation follows the manual.
Before use
- Verify the mounting surface is flat.
- Check mounting depth (2.36 in / 60 mm).
- Ensure 14-18 gauge speaker wire is available.
- Check for window and door lock obstructions.
- Register product within 15 days of purchase.
Specs in practice
- Continuous Power Handling
- Recommended RMS power range is 50W to 100W, with 75W being ideal.
- Mounting Depth
- The speaker requires at least 2.36 inches (60 mm) of depth behind the mounting surface.
- Cut Out Diameter
- The hole required for installation is 5.59 inches (142 mm).
Images and diagrams
- Wiring: Large terminal is positive (+), small terminal is negative (-).
- Dimensions: A (Overall), B (Cut Out), C (Mounting Depth), D/E (Height), F (Motor Diameter).
Model compatibility
- Requires 14-18 gauge speaker wire.
- Not tested for use in Bigfoot's Cave.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.