Power / Batteries & Chargers
User Manual for Baseus Bracket Wireless Fast Charge Power Bank 10000mAh
Quick guide for the Baseus Bracket Wireless Fast Charge Power Bank 10000mAh. Learn how to use wired and wireless charging, check battery levels, and follow safety guidelines.
Table of contents
Quick guide from the manual
This power bank supports both wired and wireless charging. To check the battery level, press the power button once. For wired charging, connect your device via USB; the power bank should start automatically, though some devices may require pressing the power button. For wireless charging, place your phone on the charging area; ensure the distance is within 8mm and no metal objects are present.
Product overview
The Baseus Bracket Wireless Fast Charge Power Bank is a portable device featuring a built-in phone stand, digital display, and safety protection circuits against overcharge, over-discharge, and temperature issues.
Technical specifications
- Model: PPCXZ10
- Capacity: 10000mAh / 3.85V / 38.5Wh
- Rated Capacity: 5800mAh (5V/3A)
- Type-C Input: 5V/3A, 9V/2A
- Type-C Output: 5V/3A, 9V/2.22A, 12V/1.5A
- Wireless Output: 5W/7.5W/10W/15W
- Operating Temperature: 0°C to 35°C
Operation instructions
Checking battery level
Press the power button once to initiate the output function and view the remaining battery level on the display. The indicator will turn off automatically after 30 seconds.
Wired charging
Connect your USB charging cable to the output port. The power bank will automatically detect the device and start charging. If charging does not start, press the power button once to manually initiate the output.
Wireless charging
Place your mobile phone in the wireless charging area. The power bank will detect the device and begin charging. If no device is detected within 30 seconds, the wireless function will automatically turn off.
Safety warnings
- Metal objects: Do not place metal materials (iron sheets, rings, metal cases) on the back of the phone while charging.
- Alignment: If charging is intermittent or the device heats up, ensure the phone's receiving coil is properly aligned with the power bank's wireless coil.
- Usage environment: Only charge your phone while it is laying on a table. Do not charge while holding the phone or wearing it on your body.
- Maintenance: Charge the power bank at least every 5 months to maintain battery health.
- Physical impact: Avoid knocking, throwing, trampling, or squeezing the device.
- Disassembly: Do not disassemble the unit yourself, as this voids warranty and safety protections.
Contact information
Manufacturer: Shenzhen Baseus Technology Co., Ltd.Address: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, ShenzhenHotline: 4000-712-711Website: www.baseus.com
Official resources from the manual
Manufacturer information
Baseus
Practical help
Common problems
Intermittent charging or overheating
Ensure the phone is properly aligned with the wireless charging coil and remove any metal cases, rings, or foreign objects from the back of the phone.
Power bank does not start charging automatically
Some devices require you to press the power button once to manually initiate the power output.
Wireless charging not working
Ensure the distance between the phone and the power bank is within 8mm. Remove thick protective cases if necessary.
Before use
- Charge the power bank fully before first use.
- Verify your device supports wireless charging.
- Remove any metal cases, rings, or iron sheets from the back of your phone.
- Ensure the ambient temperature is between 0°C and 35°C.
Specs in practice
- Rated Capacity (5800mAh)
- This is the actual usable capacity of the battery when outputting at 5V/3A, which is lower than the nominal 10000mAh due to energy conversion.
- Wireless Charging Distance (8mm)
- The maximum gap allowed between the phone and the power bank for wireless charging to function.
- Energy Conversion Rate (≥75%)
- The efficiency of the power bank in transferring stored energy to your device.
Model compatibility
- The phone must be placed on a table while charging; do not charge while holding the phone or wearing it on your body.
- If no external load is detected within 30 seconds, the power output will automatically turn off.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.