User Manual for Caliber HCG 019Qi Smart Alarm Clock

Quick guide from the manual

The Caliber HCG 019Qi is a smart alarm clock featuring Qi-certified wireless charging, a USB charging port, dual alarms, and a multi-color night light. This guide provides the necessary steps for setup and daily operation. Always ensure the ambient temperature is between 0°C and +45°C before use.

Device Overview

The device features the following controls and connections:

• 1: Night light button (press to switch colors, hold to turn off).
• 2: Clock button (set time, set alarm, toggle 12/24Hr).
• 3: + Button (increase brightness, adjust forward, toggle alarm 1).
• 4: - Button (decrease brightness, adjust backward, toggle alarm 2).
• 5: AM/PM indicator.
• 6: Alarm 1/2 indicator.
• 7: Clock display.
• 8: Qi Wireless Charging surface.
• 9: USB-A charging port (5V 0.8A).
• 10: DC power input (USB type-C).

Setup and Clock Configuration

1. Connect the provided power adapter to a 100-240V outlet and the other end to the DC input (10).
2. Press the Clock button (2) to enter time setting mode.
3. The minutes will blink. Use the + or - buttons (3/4) to adjust.
4. Press the Clock button (2) again to set the hour.
5. Use the + or - buttons (3/4) to adjust the hour.
6. Press the Clock button (2) to confirm or wait 5 seconds.
7. To toggle between 12Hr and 24Hr display, press the Clock button (2) twice.

Alarm Settings

1. Long press the Clock button (2) to enter alarm setting mode.
2. The minutes will blink and the alarm indicator will appear. Use the + or - buttons (3/4) to adjust the minutes.
3. Press the Clock button (2) again to set the hour.
4. Use the + or - buttons (3/4) to adjust the hour.
5. Press the Clock button (2) again to set alarm 2, or wait 5 seconds to confirm.
6. To activate or deactivate an alarm, press and hold the corresponding + (Alarm 1) or - (Alarm 2) button for 2 seconds.

Wireless and USB Charging

Wireless Charging: Place your Qi-compatible device on the charging surface (8). Charging begins automatically if the device is within 8mm of the pad. For fast charging, use a QC2.0 or QC3.0 adapter.

USB Charging: The USB-A port (9) provides 5V 0.8A output. Note that the USB charger cannot be used simultaneously with the wireless charging surface when using the provided adapter.

Night Light and Wake-up Light

Night Light: Press the Night light button (1) repeatedly to cycle through color modes. Press and hold to turn the light off.

Wake-up Light: The device features an automatic wake-up light that begins to illuminate 10 minutes before the alarm sounds, reaching full brightness at the alarm time.

Safety and Maintenance

• Clean the device with a soft, dry cloth. For stubborn stains, dampen the cloth with water only.
• Do not attempt to repair the unit yourself.
• Place the device on a flat surface with sufficient space for ventilation.
• Keep away from heat sources and direct sunlight.