Lighting / Fixtures
Assembly Instructions for Crystorama 2030-AG Chandelier
A comprehensive assembly and installation guide for the Crystorama 2030-AG 4-Light Chandelier. Includes step-by-step mounting instructions, bulb requirements, and a detailed parts breakdown.
Quick answers from the manual
Quick answer
- The Crystorama 2030-AG is a 4-light chandelier. It requires 4 medium-base bulbs (40W recommended, 60W max) and must be installed by a licensed electrician. p. 1
Key actions
- Assemble the acrylic ball structure using the provided threaded pipes and caps. p. 1
- Attach the fixture to the canopy using the 12-inch and 3-inch stems. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb | 4 x Medium Base | Standard medium base bulbs | p. 1 |
| Max Wattage | 60W | Maximum wattage per bulb | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Assembly Instructions p. 1
- Parts List p. 2
Table of contents
Manual images
Click an image to enlargeImportant Information
The Crystorama 2030-AG is a 4-light chandelier designed for indoor use. It is rated for dry locations only. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and local electrical codes.
Bulb Requirements:
- Requires 4 Medium-base bulbs.
- Recommended: 40 Watts.
- Maximum: 60 Watts per bulb.
- Bulbs are not included.
- LED bulbs are recommended for extended use.
Installation Instructions
- Screw the top threaded pipe onto the top of the light cluster.
- Pass the top threaded pipe through the hole on the top half of the acrylic ball, then place the top metal cap over it and secure with the decorative nut.
- Screw the bottom threaded pipe onto the bottom of the light cluster.
- Place the bottom half of the acrylic over the bottom threaded pipe and insert it onto the slot of the metal band.
- Secure the bottom half of the acrylic ball with the bottom cap and finial.
- Thread the 12-inch rod (the one with a threaded nut welded onto one end) onto the canopy.
- If needed, continue to add more 12-inch stems.
- Finally, thread the 3-inch stem.
Parts List
The following parts are included with the fixture:
- Mounting Hardware: Wire nuts, wall anchors, anchor screws, screws, mounting plate, green ground screw.
- Fixture Components: Canopy, 12-inch rods, 3-inch rod, decorative nut, top metal cap, top threaded pipe, top half acrylic ball, light cluster, metal band, bottom threaded pipe, bottom half acrylic ball, bottom metal cap, finial.
Safety Warnings
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Ensure the power is turned off at the source before beginning installation.
Official resources from the manual
Manufacturer information
Crystorama
Practical help
Common problems
Bulb compatibility
Use 4-Medium base bulbs, 40W recommended (60W max). LED bulbs are recommended for extended use.
Installation requirement
Must be installed by a licensed electrician in accordance with the National Electric Code.
Before use
- Ensure power is turned off at the source.
- Verify all parts are present according to the parts list.
- Confirm the ceiling can support the fixture weight.
- Ensure you have a licensed electrician for installation.
Show more Show less
Images and diagrams
- The sketch map shows the assembly order of the acrylic balls, metal caps, and rods.
- The parts diagram identifies hardware (A) through finial (O).
Model compatibility
- This fixture is DRY rated only.
Manual page author
David Miller
Documentation analyst