Lighting / Fixtures
Assembly Instructions for Crystorama 237-MK Calypso Six Light Chandelier
Quick guide for assembling and installing the Crystorama 237-MK Calypso chandelier. Includes parts list, bulb requirements, and crystal hanging instructions.
Quick answers from the manual
Quick answer
- The Crystorama 237-MK is a six-light chandelier that requires 6 Candelabra Base bulbs (max 60W each). It must be installed by a licensed electrician. p. 1
Key actions
- Connect hanging rods to the banding ring and loop. p. 1
- Attach the bottom basket to the banding ring. p. 1
- Hang crystals alternating between type A and B. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Type | Candelabra Base | Standard bulb base for this fixture | p. 1 |
| Max Wattage | 60W | Maximum wattage per bulb | p. 1 |
| Rating | Damp rated | Suitable for damp locations | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Assembly Instructions p. 1
- Parts List p. 2
Table of contents
Quick guide from the manual
This document provides assembly and installation instructions for the Crystorama 237-MK Calypso chandelier. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes. Ensure the power is turned off before beginning installation.
Assembly and Installation
- Prepare the frame: Connect one end of the hanging rod to the hole inside the banding ring, and the second end of it to the loop.
- Attach the basket: Raise the bottom basket and connect the hooks of the bottom basket to the rods of the banding ring.
- Hang crystals: Attach crystals to the banding ring and bottom basket, alternating between glass drop A (29mm) and glass drop B (76mm).
- Install bulbs: Install the bulbs (not included) into the sockets.
Technical Specifications
- Bulb requirements: 6x Candelabra Base bulbs. 40 Watts recommended, 60 Watts maximum.
- Rating: This fixture is Damp rated.
- Dimensions: 24-7/8 inches diameter, 19-3/4 inches fixture height, 93-3/4 inches total height.
Parts List
The following parts are included with the fixture:
- Mounting hardware
- Canopy (W5-7/8" x H1-1/8")
- Collar ring and Collar loop
- Chain (L72", 4mm thick)
- Loop
- Hanging rods (3 count, D1/2" x L15-5/8")
- Banding ring
- Sockets (6 count)
- Bottom basket
Manufacturer information
Crystorama
Practical help
Common problems
Fixture not hanging correctly
Ensure the hanging rods are securely connected to both the loop and the banding ring.
Crystal arrangement confusion
Hang crystals on the rings alternating between crystal A (29mm) and crystal B (76mm).
Before use
- Hire a licensed electrician for installation
- Turn off electrical power
- Verify all parts (A-J) are present
- Ensure the ceiling box can support the fixture weight
Show more Show less
Specs in practice
- Candelabra Base
- Standard E12 base bulb type.
Model compatibility
- Use LED bulbs for extended use.
- Fixture is Damp rated.
Manual page author
David Miller
Documentation analyst