Lighting / Fixtures
Crystorama 237-VG Calypso Chandelier Assembly Instructions
Assembly and installation guide for the Crystorama 237-VG Calypso Chandelier. Includes parts list, crystal arrangement instructions, bulb requirements, and safety warnings.
Quick answers from the manual
Quick answer
- The Crystorama 237-VG Calypso Chandelier requires 6 Candelabra base bulbs (40W recommended, 60W max). It is a damp-rated fixture that must be installed by a licensed electrician. p. 1
Key actions
- Connect hanging rods to the banding ring and loop. p. 1
- Attach the bottom basket to the banding ring. p. 1
- Hang crystals in an alternating pattern (A and B). p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb | 6x Candelabra Base | 40W recommended, 60W max | p. 1 |
| Chain | 72 inches | Length of the included chain | p. 2 |
| Rating | Damp rated | Suitable for damp locations | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Assembly Instructions p. 1
- Parts List p. 2
Table of contents
Quick guide from the manual
This document provides assembly and installation instructions for the Crystorama 237-VG Calypso Chandelier. The fixture is damp-rated and requires a licensed electrician for installation. Ensure power is turned off at the circuit breaker before beginning.
Bulb Requirements
The fixture requires 6 Candelabra base bulbs. The recommended wattage is 40 Watts, with a maximum of 60 Watts. LED bulbs are recommended for extended use.
Assembly Instructions
- Connect one end of the hanging rod to the hole inside the banding ring and the second end to the loop.
- Raise the bottom basket and connect the hooks of the bottom basket to the rods of the banding ring.
- Hang the crystals to the banding ring and bottom basket, alternating between glass drop A and glass drop B.
- Install the bulbs (not included) into the sockets.
Crystal Arrangement
The fixture uses two types of crystals:
- Crystal A: 29mm (117 sets)
- Crystal B: 76mm (118 sets)
Hang the crystals on the rings by alternating between crystal A and crystal B.
Safety Warnings
This product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
Manufacturer information
Crystorama
Practical help
Common problems
Fixture not hanging level
Ensure all hanging rods are securely connected to the loop and the banding ring.
Bulb compatibility
Use Candelabra base bulbs. 40W is recommended, 60W is the maximum.
Before use
- Turn off power at the circuit breaker.
- Verify all parts are present according to the parts list.
- Ensure the ceiling junction box can support the weight of the fixture.
- Hire a licensed electrician for installation.
- Confirm the installation location is suitable for a damp-rated fixture.
Show more Show less
Specs in practice
- Chain length
- 72 inches.
Model compatibility
- Fixture is damp rated.
- Bulbs are not included.
Manual page author
Emily Carter
User documentation editor