Lighting / Fixtures
Installation Guide for Crystorama 2107-AG Chandelier
Step-by-step installation guide for the Crystorama 2107-AG chandelier. Includes assembly instructions, bulb requirements, and essential safety tips for handling the glass shade.
Quick answers from the manual
Quick answer
- The Crystorama 2107-AG is a one-light chandelier that requires a licensed electrician for installation. It uses one medium-base bulb (40W recommended, 60W max) and requires two people for safe assembly, specifically to support the fragile glass shade. p. 1
Key actions
- Support the glass shade on the provided EPS foam block while attaching the metal band. p. 1
- Install the metal band, then the bulb, then the metal caps. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb | 1-Medium | Bulb type required | p. 1 |
| Wattage | 40W / 60W | 40W recommended, 60W max | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Assembly Instructions p. 1
- Parts List p. 2
Table of contents
Quick guide from the manual
This document provides assembly and installation instructions for the Crystorama 2107-AG chandelier. It is strongly recommended that two people perform the assembly. All electrical work must be performed by a licensed electrician in accordance with the National Electric Code and local electrical codes.
Installation instructions
- Prepare the glass: Remove the glass shade from the package, remove the polybag, and place it horizontally on the EPS foam block provided in the packaging.
- Install the metal band: Place the metal band onto the glass shade while resting the shade on the foam block. Hold the band straight while the second person secures it using the provided screws.
- Install bulbs: Insert the required bulb into the socket.
- Assemble caps: Attach the lower metal cap and socket cluster into the glass shade.
- Finalize: Attach the upper metal cap onto the glass shade and secure it using the decorative nut.
Handling the glass shade
The glass shade is fragile. Always use the provided EPS foam block as a support base when assembling the metal ring to the glass. Do not attempt to assemble the metal ring while the glass is unsupported, as this may cause breakage.
Parts list
The following components are included with the fixture:
- Mounting hardware (Wire nuts, wall anchors, anchor screws, mounting plate, green ground screw)
- Canopy
- Rods (12" and 3" lengths)
- Decorative nut
- Upper and lower metal caps
- Socket
- Metal band
- Ball nuts and screws
- Glass shade
Technical specifications
- Bulb type: 1 Medium base bulb
- Wattage: 40 Watts recommended, 60 Watts maximum
- Rating: DRY rated
Manufacturer information
Crystorama
Practical help
Common problems
Glass shade breakage during assembly
Always place the glass shade horizontally on the provided EPS foam block for support when attaching the metal ring.
Electrical hazard
Ensure power is turned off at the circuit breaker before beginning installation. Hire a licensed electrician.
Before use
- Turn off power at the main fuse box.
- Verify you have a licensed electrician for installation.
- Ensure you have 2 people available for assembly.
- Check that you have the correct bulb (Medium base, max 60W).
- Prepare the EPS foam block for glass support.
Show more Show less
Specs in practice
- 40 Watts Recommended
- Optimal wattage for standard operation.
- 60 Watts Max
- Do not exceed this wattage to prevent overheating and damage to the fixture.
Images and diagrams
- The Sketch Map illustrates the correct way to support the glass shade on the EPS foam block to prevent damage during assembly.
- The parts diagram identifies all hardware components, including rods, canopy, and metal caps, to ensure correct assembly order.
Model compatibility
- Bulb is not included.
- LED bulbs are recommended for extended use.
Manual page author
Michael Turner
Technical manual editor