Software / Apps Services
Einhell CC-AC 35/10 12V Car Compressor User Manual
Quick guide for the Einhell CC-AC 35/10 12V car compressor, including operating instructions, safety warnings, inflation procedures for tires and inflatables, and maintenance tips.
Table of contents
Quick guide from the manual
This document provides essential operating instructions for the Einhell CC-AC 35/10 12V car compressor. It is designed for inflating car, motorcycle, and bicycle tires, as well as balls and small air mattresses. The device operates via a 12V cigarette lighter socket.
Safety instructions
- Operate only from a 12V DC power source. Higher voltages will destroy the compressor.
- The compressor is not suitable for permanent duty. After 15 minutes of operation, a 10-minute cooling phase is required.
- Ensure reliable contact between the plug and the socket to prevent overheating and fire hazards.
- Keep ventilation slots clean and free of dust.
- Protect the compressor from rain, splashing water, and damp environments.
- Do not use the compressed air to clean clothing or direct it at people.
Operation
Insert the 12V plug into a matching cigarette lighter socket.
Inflating tires
- Remove the valve cap.
- Screw the connector of the air hose onto the tire valve. For bicycle tires, use the appropriate adapter if necessary.
- Check the pressure gauge before switching on.
- Set the On/Off switch to 'I' to start and '0' to stop.
Inflating balls and air mattresses
Select the appropriate adapter from the included set and screw it into the connector of the compressed air hose. Be careful not to over-inflate, as these items may burst.
Air pressure test
This function allows you to check tire pressure without turning on the compressor. Follow the connection steps described for inflating tires and read the pressure on the gauge.
Cleaning and maintenance
Always disconnect the 12V plug before cleaning. Wipe the device with a clean cloth or blow it with low-pressure compressed air. Do not use cleaning agents or solvents, as they may damage plastic parts. Ensure no water enters the device.
Technical data
- Power supply: 12V via cigarette lighter plug
- Pumping capacity: max. 10 bar (145 PSI)
- Working pressure max.: 8 bar (116 PSI)
- Air hose length: 1.5 m
- Operating time: max. 15 minutes
Manufacturer information
Einhell
Practical help
Common problems
Compressor does not work
Check the miniature fuse inside the 12V plug. If defective, replace it with a fuse of the same rating.
Overheating
Ensure the compressor is not used for more than 15 minutes continuously; allow a 10-minute cooling phase.
Before use
- Check the pressure gauge for damage.
- Ensure the 12V plug is clean and makes reliable contact.
- Verify that the ventilation slots are free of dust.
- Ensure the compressor is not placed on a heated surface.
Specs in practice
- Max. 10 bar (145 PSI)
- Maximum pumping capacity of the compressor.
Model compatibility
- Operate only with 12V DC power sources.
- Not suitable for commercial, trade, or industrial use.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.