Electro Harmonix 44MAGNUM Guitar Power Amplifier User Manual

Quick guide for the Electro Harmonix 44MAGNUM power amplifier. Learn about proper speaker cabinet connections, power requirements, control functions, and safety warnings to ensure optimal performance.

Table of contents

Quick guide from the manual

The 44MAGNUM is a compact 44-watt guitar power amplifier. It is designed to drive a speaker cabinet directly. Important: This is a power amplifier, not an effects pedal. Never connect its output to the input of another amplifier, mixer, or interface. Always connect the speaker cabinet before applying power.

Controls and Jacks

VOLUME CONTROL: Adjusts the output loudness. Turning it clockwise increases volume and eventually introduces power amp saturation (overdrive).
BRIGHT/NORM CONTROL: In the BRIGHT position, it adds a subtle top-end boost. In the NORM position, the boost is disabled.
INPUT Jack: Connect your guitar, preamp, or effects pedals here using a standard 1/4-inch instrument cable. Input impedance is 2 MΩ.

Setup and Connections

To operate the 44MAGNUM, follow these steps:

Ensure the unit is powered off.
Connect the 44MAGNUM output to a speaker cabinet with an impedance between 8 Ω and 16 Ω. An 8 Ω load is ideal.
Use the supplied 24VDC / 3A power adapter. Do not use any other power supply, as it may damage the unit.
Power on the unit only after the speaker cabinet is connected.

Safety and Troubleshooting

If the unit is connected to a speaker cabinet while already powered on, it may automatically mute to prevent a short circuit. If this happens, disconnect the power, wait a few seconds, and reconnect it. The unit requires a speaker cabinet with at least a 50W peak rating (or 25W RMS).

Practical help

Common problems

No sound output

Ensure the speaker cabinet is connected before powering on. If the unit muted itself, power it off, wait a few seconds, and power it back on.

Unit damage

Never connect the output to another amplifier, mixer, or computer interface. Use only the supplied 24VDC/3A power adapter.

Before use

Verify speaker cabinet impedance is between 8 Ω and 16 Ω.
Ensure speaker cabinet power rating is at least 50W peak (25W RMS).
Use only the provided 24VDC/3A power supply.
Connect the speaker cabinet before plugging in the power supply.

Specs in practice

Input Impedance: 2 MΩ, suitable for standard guitar and pedal outputs.
Power Output: 44 watts, designed for driving speaker cabinets.
Power Requirements: Exactly 24VDC, center positive polarity.

Model compatibility

Compatible with 8 Ω to 16 Ω speaker cabinets.
Not compatible with batteries.
Do not use AC power supplies; DC power only.

Show more Show less

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.