Lighting / Controllers & Dimmers
Enerlites 67300 30A Flush Mount Power Outlet
Quick guide for the Enerlites 67300 30A Flush Mount Power Outlet. Includes wiring instructions, compatibility requirements, and safety warnings for proper installation.
Table of contents
Quick guide from the manual
This document provides installation instructions for the Enerlites 67300 30A Flush Mount Power Outlet. Before beginning, ensure the power is turned off at the circuit breaker. It is strongly recommended that a qualified electrician performs the installation to ensure compliance with the National Electric Code and local regulations.
Installation Requirements
This device has specific installation constraints:
- Wall Boxes: Do not use with single-gang wall boxes, single-gang mud rings, or single-gang box extenders.
- Wire Compatibility: Use #10 AWG through #4 AWG copper, copper-clad, or aluminum wire.
- Torque: Tighten all terminal screws to 30 in-lbs of torque.
Wiring Instructions
Follow these steps to connect the wires to the terminals:
- Connect the RED/HOT wire to the Y terminal and tighten the screw.
- Connect the BLACK/HOT wire to the X terminal and tighten the screw.
- Connect the WHITE/NEUTRAL wire to the WHITE terminal and tighten the screw.
Technical Specifications
- Model: 67300
- Type: NEMA 10-30R, 3 Wire, 3 Pole
- Rating: 30A, 125/250 VAC, 60Hz
Warranty Information
The device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Claims must be verified and approved by Enerlites, Inc. The warranty is non-transferable and does not cover normal wear and tear, misuse, abuse, neglect, or improper installation.
Practical help
Common problems
Incorrect wall box type
Do not use single-gang wall boxes, single-gang mud rings, or single-gang box extenders.
Loose terminal connections
Ensure all terminal screws are tightened to 30 in-lbs of torque.
Before use
- Turn off power at the circuit breaker or fuse(s).
- Verify that the wall box is not a single-gang type.
- Ensure wire gauge is between #10 AWG and #4 AWG.
- Confirm wire type is copper, copper-clad, or aluminum.
Images and diagrams
- The wiring diagram illustrates the Y, X, and WHITE terminals.
- Red wire connects to the Y terminal.
- Black wire connects to the X terminal.
- White wire connects to the WHITE terminal.
Model compatibility
- Compatible with #10 AWG to #4 AWG wire.
- Not compatible with single-gang wall boxes, mud rings, or extenders.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.